Velleman DVR4MQAEB Instructions Manual
Velleman DVR4MQAEB Instructions Manual

Velleman DVR4MQAEB Instructions Manual

Digital 4-channel multiplexer quad mpeg-4 recorder + ethernet

Advertisement

Quick Links

DVR4MQAEB – DIGITAL 4-CHANNEL MULTIPLEXER QUAD MPEG-4 RECORDER + ETHERNET
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the DVR4MQAEB! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer. Contents: 1 digital video recorder, 1
power adapter, software, accessories, HDD key and this manual.

2. Safety Instructions

Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Keep this device away from rain and moisture.
Be aware of the presence of uninsulated dangerous voltage.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will
not accept responsibility for any ensuing defects or problems.
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT
RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED
FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM
3. Features
MPEG4 DVR technology:
o compression format provides crystal clear image with real time performance
Multiplex:
o allows live display, record, playback, backup, and network at the same time
Long recording period:
o 500GB can record more than 18 days. (4CH, Frame Best Quality, 30IPS)
Backup function
o backup files with USB memory stick and network remote recording & backup
Remote surveillance:
o remote surveillance with licensed software AP and IE browser. Web surveillance supports 5 users
simultaneously.
DVR4MQAEB
- 1 -
VELLEMAN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVR4MQAEB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Velleman DVR4MQAEB

  • Page 1: Safety Instructions

    If in doubt, contact your local waste disposal authorities. Thank you for buying the DVR4MQAEB! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it and contact your dealer. Contents: 1 digital video recorder, 1 power adapter, software, accessories, HDD key and this manual.
  • Page 2: Package Contents

    • motion detection sensitivity: 4 adjustable variables with precise calculation for motion detection • pre-alarm recording: yes (8MB) • USB interface: supports USB 1.1/2.0 USB memory stick • backup device: supports USB 1.1/2.0 USB memory stick and network DVR4MQAEB - 2 - VELLEMAN...
  • Page 3 4. SEARCH Press this button to enter the search mode. 5. SLOW Under playback mode, press SLOW for a slow playback. 6. ZOOM Press “ZOOM” button to enlarge the picture of selected channel (under live mode). DVR4MQAEB - 3 - VELLEMAN...
  • Page 4 Press SEQ to activate the call monitor function. Press SEQ again to escape this mode. Press + to change the settings in the menu. 9. POWER Turn the DVR4MQAEB on or off with this button. In the recording mode, stop the recording before switching off the device. 10. CH1, CH2, CH3, CH4 Press one of these buttons to select the channel.
  • Page 5: Call Monitor

    It takes approx. 10 to 15 second to boot the system. NOTE: Please refer to Appendix #1 for HDD installation instructions. NOTE: Please refer to Appendix #2 for pin configurations of the external I/O port. DVR4MQAEB - 5 - VELLEMAN...
  • Page 6: Basic Operation

    When this function is activated, the recording is triggered by motion or external alarm and indicated by “ ” and “ ”. 3) TIMER RECORDING (scheduled time): Recording is scheduled by the timer and is indicated by “TIMER RECORD”. DVR4MQAEB - 6 - VELLEMAN...
  • Page 7: Channel Shift

    Press simultaneously to select live or playback sounds of the 2 audio channels. * AUDIO 1 (L) ; AUDIO 1 (P) * AUDIO 2 (L) ; AUDIO 2 (P) L: live audio P: playback audio DVR4MQAEB - 7 - VELLEMAN...
  • Page 8 8. Detailed menu configuration a. Menu diagram DVR4MQAEB - 8 - VELLEMAN...
  • Page 9 10. TOTAL IPS SHARE: There are two IPS settings: FIX: IPS per channel = RECORD IPS ÷ 4 channels GROUP (suited for Frame Modus): IPS per channel = RECORD IPS ÷ number of channels under recording DVR4MQAEB - 9 - VELLEMAN...
  • Page 10 2006-MAR-28 13: 23: 00 FORMAT Y-M-D DAYLIGHT SAVING 1. DATE: Set the correct time of the DVR (YEAR / MONTH / DAY / HOUR / MIN / SEC). 2. FORMAT: There are three date formats: Y-M-D, M-D-Y, D-M-Y. DVR4MQAEB - 10 - VELLEMAN...
  • Page 11 The level is from 0 to 255. The default value of BRIG is 110, others are 128. 3. COV (COVER): Select “YES” to mask the selected channel which is under recording. When this function is activated, the “COV” words will be shown on the screen. DVR4MQAEB - 11 - VELLEMAN...
  • Page 12 4. LS: The sensitivity of comparing two different images. The smaller the value, the higher sensitivity for motion detection. The highest sensitivity setting is 00, the lowest sensitivity setting is 15. The default value is 07. DVR4MQAEB - 12 - VELLEMAN...
  • Page 13 LOSS SCREEN BLUE PLAYBACK INFO NORMAL DWELL DURATION (SEC) DE-INTERLACE MONITOR OUT MAIN SETUP WATERMARK 1. TITLE DISPLAY: Turn the channel title display on / off. 2. DATE DISPLAY: Turn the date display on / off. DVR4MQAEB - 13 - VELLEMAN...
  • Page 14 If HDD buzzer is on, you can choose to have a buzzer notification when the HDD available capacity has only xxx GB left. 9. ALARM DURATION (SEC): Press “ENTER” or “+” or “-” button to set the duration time of alarm recording (5, 10, 20, 40 sec.). DVR4MQAEB - 14 - VELLEMAN...
  • Page 15 Move the cursor to the “SYSTEM” and press ”ENTER”. The screen will show the following options: SYSTEM SERIAL TYPE RS-485 BAUD RATE 02400 HOST ID PASSWORD 0000 RESET DEFAULT RESET CLEAR HDD MASTER UPGRADE AUTO KEYLOCK NEVER LANGUAGE ENGLISH VERSION 1030-08-H3-04-V354-07 VIDEO FORMAT NTSC DVR4MQAEB - 15 - VELLEMAN...
  • Page 16 This DHCP function needs to be supported by router or modem network cable with DHCP service. For detailed DHCP setting, refer to “9.e. Software AP”. 3. NETWORK TYPE (PPPoE): This PPPoE function needs to have “username” and “password” from ISP supplier. For detailed PPPoE setting, refer to “9.e. Software AP”. DVR4MQAEB - 16 - VELLEMAN...
  • Page 17 4. The backup files can be viewed with the licensed software AP. Users can also convert the file to AVI. For detailed information on AP playback, see 9.e. Advance menu: HDD INFO You can get all the capacity information of the connected HDD. HDD INFO HDD NUM HDD SIZE MASTER 400.517 DVR4MQAEB - 17 - VELLEMAN...
  • Page 18 5. ALARM LIST: List of alarm-triggered recorded files. 6. MOTION LIST: List of motion-triggered recorded files. 7. TIME SEARCH: Search by specific time period (YEAR / MONTH / DAY / HOUR / MIN). DVR4MQAEB - 18 - VELLEMAN...
  • Page 19 4. Select “YES” and press “ENTER” again to confirm upgrade. NOTE: 1. The USB format must be “FAT 32”. 2. If the USB is not supported by the DVR then the “USB ERROR” message will be shown on the screen. DVR4MQAEB - 19 - VELLEMAN...
  • Page 20: Software Installation

    Player: press this button to access and play the recorded files saved in your PC. NOTE: The version of the licensed software will appear on the login page. 7. Introduction of basic operation: video web server control panel. DVR4MQAEB - 20 - VELLEMAN...
  • Page 21 Set: press this button to change channel display position. Press “▲▼◄►” to select the channel you would like to change. Press “+” or “-” to select the channel you would like to show. Press “Enter” button to confirm. DVR4MQAEB - 21 - VELLEMAN...
  • Page 22 For example, If you set the turbo function to 3, one mouse click will have the same effect as 3 mouse clicks. Control panel ~ PTZ j. Preset 1 ~ 16 k. AUTO zoom in zoom out focus near focus far Max zoom in Max. zoom out DVR4MQAEB - 22 - VELLEMAN...
  • Page 23 Watermark: Proof of the authenticity of the backup video. Open Previous File: Open previous backup video. Open Next File: Open next backup video. D. Playback control buttons: Play / Stop / Pause / Fast Rewind / Fast Forward DVR4MQAEB - 23 - VELLEMAN...
  • Page 24: Advanced Setting

    AP or a web browser. Typically, the TCP port used by HTTP is 80. However in some cases it is better to change this port number for added flexibility or security. Valid number is 80 ~ 19999. DVR4MQAEB - 24 - VELLEMAN...
  • Page 25: Ddns Apply

    • Use the DDNS username and password to login the DynDNS. • Create Hostname: Login → “Account” → “My Service” → “Add Host Services” → “Add Dynamic DNS Host” → Enter and choose the hostname → Click on “Add Host” → DDNS Hostname created. DVR4MQAEB - 25 - VELLEMAN...
  • Page 26 Enter the camera channel name (up to 6 characters). 4. Adjust the BR (brightness) / CT (contrast) / ST (saturation) / HUE (hue) / REC (recording) of the camera. 5. Press “OK” and "APPLY" to confirm. DVR4MQAEB - 26 - VELLEMAN...
  • Page 27 Choose the ID number (0 to 255) of the installed external PTZ devices. 4. Protocol Type: Choose “NORMAL” protocol for our own brand camera. Choose “P-D” (PELCO-D) protocol for all VELLEMAN cameras. 5. Baud Rate: Set the baud rate of each channel (2400, 4800, 9600, 19200, 38400, 57600, 115200), depending on the specifications of the dome camera.
  • Page 28: Network Backup

    (4) AVI Convert (5) Config. Setting (6) Watermark (7) Open Previous (8) Open Next File D. Playback Control Buttons : Play / Stop / Pause / Fast Rewind / Fast Forward E. Snapshot F. Close the Player. DVR4MQAEB - 28 - VELLEMAN...
  • Page 29: Search List

    5 times. 3. Max Log List: Set the maximum number of log list. 4. Server Log: Press “Server Log” button to enter the server log list window. DVR4MQAEB - 29 - VELLEMAN...
  • Page 30 Get all the online users’ information here (Name, IP Address, Authority Level, Resolution and Image Quality). FILE PATH 1. Snapshot Path: Assign the route for saving the snapshot picture. 2. Record Path: Assign the route for saving the manual recording file. DVR4MQAEB - 30 - VELLEMAN...
  • Page 31 NOTE: If the TCP port number is not 80, see the example below. IP address: 192.168.1.10; Port number: 888 > Key in “60.121.46.236: 888” into the URL address box and press ENTER. Download AP Download JAVA Step 2: Press the “Download JAVA” button DVR4MQAEB - 31 - VELLEMAN...
  • Page 32: Troubleshooting

    3) Connect the HDD to the power cable and the IDE BUS (make sure the HDD perfectly fits the pin connections) Screw the bracket onto the DVR base (fig. 3). 4) Close the upper part of the housing (fig. 4 & 5) DVR4MQAEB - 32 - VELLEMAN...
  • Page 33: Appendix #2 - Pin-Configuratie

    “High””. PIN 15: EXTERN ALARM COM Under normal operation, the COM disconnects from NO. When the alarm is triggered, the COM connects with NO . Voltage limitation: AC/DC 30V. PIN 16 +17: GND Earth GND DVR4MQAEB - 33 - VELLEMAN...
  • Page 34: Appendix #3 - Rs-232 Protocol

    971.3 40.5 High 1768.9 73.7 2857.9 119.1 Frame 726.2 30.3 1276.0 53.2 Normal 2323.9 96.8 3754.5 156.4 1173.7 48.9 2062.2 85.9 Basic 3755.9 156.5 6068.1 525.8 520.8 21.7 915.1 38.1 Best 1666.7 69.4 2692.7 112.2 DVR4MQAEB - 34 - VELLEMAN...
  • Page 35 Maxtor DiamondMax 10 6L120PO 120GB 7200rpm Maxtor DiamondMax 10 6L160R0 160GB 7200rpm Maxtor DiamondMax 10 6L200R0 200GB 7200 rpm Maxtor DiamondMax 10 6L200PO 200GB 7200 rpm Maxtor 250GB 7200 rpm MaxLine Plus II, Model# 7Y250P0 DVR4MQAEB - 35 - VELLEMAN...
  • Page 36 250GB 7200 rpm VELLEMAN cannot be held responsible in the event of damage to or loss of programmes, data or removable media. VELLEMAN advises you to regularly make backups onto different storage media (disc, CD-ROM etc.) of your documents, data, files or software installed onto our product.

Table of Contents