Motorola CDM1550 User Manual page 59

Sending a Call
1. Turn radio on and select appropriate zone and channel.
2. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth,
and speak clearly into it.
3. Release PTT to listen.
Receiving a Call
1. Turn radio on and adjust volume to the desired level.
2. Select desired channel.
3. To respond to an incoming call, press PTT, hold the microphone 1 to 2 inches
(2.5 to 5 cm) from your mouth, and speak clearly into it.
Deleting a Nuisance Channel During Scanning
1. While radio is on a nuisance channel, hold down preprogrammed Scan button
until you hear a tone.
2. Release Scan button.
Making a Phone Call
1. Press Phone button, or select Phone from the menu.
2. If access code is not displayed, send access code if required.
3. Send phone number in one of the following ways:
• Press and release PTT to send last dialed number.
— or —
• when using an enhanced keypad microphone only, press preprogrammed
Speed Dial button, followed by a keypad key (1–8), to access first nine
numbers in your phone list. (Press PTT if buffered dial.)
— or —
• when using an enhanced keypad microphone only, enter phone number
using the keypad. (Press PTT if buffered dial.)
4. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth,
and speak clearly into it.
Ending a Phone Call
1. Send deaccess code if required.
2. Press preprogrammed Phone button, or press (.
Sending and Cancelling an Emergency Alert
• To activate Emergency Alert ., press preprogrammed Emergency button.
• To cancel, press and hold down Emergency button .
CDM1550
Record the functions for your radio's programmable buttons in the table
provided below. For further information, see page 8 of this User Guide.
Red/Yellow/Green
LED Indicators
LCD Screen
On/Off/Volume
Knob Menu Exit/Escape
Microphone
Jack
Programmable
Programmable
Button 2 (P2)
Button 1 (P1)
(Interchangeable)
(Interchangeable)
Button Function Short Press
™
Quick Reference Card
Channel Selector/
Menu Navigation Buttons
(Up/Down)
Programmable
Menu Enter/Select
Button (Interchangeable)
Button
Programmable
Button 4 (P4)
Editing
(Interchangeable)
Buttons
(Left/Right)
Long Press Hold Down
Button 3 (P3)
Page