Wall Adjustment - Viessmann VITOTROL 100 Operating Instructions Manual

Display version
(cont.)
Display Rotary selector position
P1, P2, P3
Display version
1
Time X
Set temp.
Actual temp. X
Program
Turn the rotary program selector to
"MENU" and press the following keys:
1. a/b until "SERVICE" is dis-
played; symbol "Ä"
flashes.
2. d
to confirm, "DISPLAY"
flashes.

Wall adjustment

The displayed room temperature can
deviate from the actual room tempera-
ture if your Vitotrol 100 is installed in
an unfavourable position, e.g. on an
external wall or near a chimney. You
can correct this temperature deviation
with a compensator.
Example:
The room temperature displayed by
the Vitotrol 100 is 2 ºC higher than the
actual room temperature. The com-
pensator is -2 ºC.
2 3 4 5
X X
X X X
X X
3. d
4. a/b until the required version is
5. d
6. Turn the rotary selector to the
required program.
Turn the rotary program selector to
"MENU" and press the following keys:
1. a/b until "SERVICE" is dis-
2. d
3. a/b until "WALL COMP" is dis-
4. d
Further adjustments
Rotary selector position
ts, tm, te
Display version
1 2 3 4
X X
X X
X X X X
to confirm.
displayed.
to confirm.
played; symbol "Ä"
flashes.
to confirm, "DISPLAY"
flashes.
played.
to confirm.
5
X
X
23