Dirt Devil 360 REACH DDU03-E01 User Manual page 14

REMOVE BLOCKAGES
FROM POWERED HEAD
1. Using scissors remove any
threads or hair from around the
brushbar and clear any dirt or
debris from powered head.
RESET THE POWERED HEAD
1. The red light on the powered
head will illuminate to indicate
there is a blockage. Switch the
vacuum cleaner off and clear
the blockage.
14
CAUTION
This vacuum cleaner is not free standing and should be
disassembled before storing.
REMOVE BLOCKAGES
FROM REACH WAND
1. To test for a blockage in the reach
wand, look through the wand to
check if it is clear. Use a broom
handle or similar blunt object to
remove any blockage.
2. Reset the powered head by
turning the power back on to
position II after the blockage has
been cleared. The brush will spin
and a green light on the powered
head will illuminate.