4.2. Reassembly Instructions
<Step 1>
8 Insert the hook Q , then push Battery knob W while
push the hook E softly.
1
2
<Step 2>
8 Insert the Antenna top to antenna hole.
<Step 3>
8 Put the speaker & vibrator on the base case by using the
tweezers.
3
Speaker
Vibrator
<Step 4>
8 Insert the MIC unit and MIC cover to main board.
<Step 5>
8 Put the receiver gasket on the receiver.
<Step 6>
8 Put the Shield cover on the PCB.
– 4–3 –
Keep flat side facing
down.
Receiver gasket
Shield cover