Auto Review; Usb Mode; Hdmi Mode; 3D Playback - Panasonic Lumix DMC-GH2 Manual

SETUP Mode Menu
Option Description
Command Page
This command sets the amount of time a picture is displayed after it is
taken.
When drive mode lever is set to Burst mode:
– Option is disabled

AUTO REVIEW

2
– 1 second hold occurs when Burst Rate = [SH], [H], or [HOLD]
MENU/SET>REC>(pg 4) BURST RATE>[M] or [L] or when the drive mode
lever is set to Burst Mode.
AUTO REVIEW can only be set to 3 SEC. or 5 SEC. when MENU/
SET>REC>FACE RECOG.>AUTO REGISTRATION>[ON].
Select this command to declare that the USB communication system is
to be used to connect the camera to your computer or printer. You can

USB MODE

2
declare the USB connection either at the time the connection is made or
prior to making the connection.
Set this command to match the color television system in each country.
VIDEO OUT 3
Note: This option is not available in US camera models. For the USA
models, VIDEO OUT is pre-set to [NTSC].
Set this option to match the type of TV used to display your stored pic-
tures and/or videos.
TV ASPECT 3
Note: You need the supplied AV cable to be connected. Refer to the sup-
plied Panasonic GH2 Operating Instructions or the Panasonic website for
TV and memory card compatibility requirements.
Use this option to set the HDMI output format to use when playing back
still pictures or videos on an HDMI-compatible HDTV.

HDMI MODE

3
Note: The playing formats are divided into two different scanning types:
interlaced and progressive.
This command allows you to use your remote control to play your pic-
VIERA Link 3 tures and videos on a Panasonic TV only. Read your TV operating manual
for capability and usage instructions.
This command allows you to set up the method to output your 3D pic-

3D PLAYBACK

3
tures.
Option Value Value Description
OFF Recorded picture is not displayed after taken.
Recorded picture is displayed for one second after taken or until another
1 SEC.
action is initiated.
Recorded picture is displayed for three seconds after taken or until
3 SEC.
another action is initiated.
Recorded picture is displayed for five seconds after taken or until another
5 SEC.
action is initiated.
HOLD Recorded picture is displayed indefinitely until another action is initiated.
SELECT ON
Declare the type of USB connection at the time it is made.
CONNECTION
Declare the USB connection is to a printer that supports PictBridge/
PictBridge(PTP) Picture Transfer Protocol (PTP). This can be declared prior to or at the time
the connection is made.
Declare the USB connection is to a computer. This can be declared prior to
PC
or at the time the connection is made.
NTSC Video output is set to NTSC system.
PAL Video output is set to PAL system.
16 to 9 ratio of width to height.
4 to 3 ratio of width to height.
Output resolution automatically set based on information sent from the
AUTO
connected TV.
1080i 1080 interlaced scan lines are used for output.
720p 720 progressive scan lines are used for output.
576 progressive scan lines are used for output. Note: This option displays
576p
in non-US camera models when VIDEO OUT is set to [PAL].
480 progressive scan lines are used for output. Note: This option displays
480p in US camera models and in non-US camera models when VIDEO OUT is
set to [NTSC].
OFF Equipment operated without remote control unit.
Allows you to play your pictures and/or videos according to selected
ON
PLAYBACK Menu options.
Use this option when connecting to a 3D-compatible TV.
Use this option when connecting to a TV not compatible with 3D or to
view pictures in 2D on a 3D-compatible TV.
18