Ricoh Z-P2 Field Service Manual page 304

5. System Maintenance Reference
2-193-002 Page: Job End: BW+FC
Adjusts the threshold of the line position adjustment for BW and color printing mode
after job end.
2-193-003 Page: Job End: FC
Adjusts the threshold of the line position adjustment for color printing mode after job
end.
2-193-004 Page: Interrupt: BW+FC
Adjusts the threshold of the line position adjustment for BW and color printing mode
during job.
2-193-005 Page: Interrupt: FC
Adjusts the threshold of the line position adjustment for color printing mode during
jobs.
2-193-006 Page: Standby: BW
Adjusts the threshold of the line position adjustment for BW printing mode in stand-by
mode. The line position adjustment is done when the number of outputs in BW printing
mode reaches the value specified with this SP and the condition of SP2-193-008 or
SP2-193-009 is satisfied.
2-193-007 Page: Standby: FC
Adjusts the threshold of the line position adjustment for BW printing mode in stand-by
mode. The line position adjustment is done when the number of outputs in color
printing mode reaches the value specified with this SP and the condition of
SP2-193-008 or SP2-193-009 is satisfied.
2-193-008 Temp.
Adjusts the temperature change threshold for the line position adjustment (Mode b:
adjustment once). The timing for line position adjustment depends on the combinations
of several conditions.
2-193-009 Time
Adjusts the time threshold for the line position adjustment (Mode b: adjustment once).
The timing for line position adjustment depends on the combinations of several
conditions.
302
*ENG [0 to 999 / 500 / 1 page/step]
*ENG [0 to 999 / 200 / 1 page/step]
*ENG [0 to 999 / 200 / 1 page/step]
*ENG [0 to 999 / 200 / 1 page/step]
*ENG [0 to 999 / 100 / 1 page/step]
*ENG [0 to 999 / 100 / 1 page/step]
*ENG [0 to 100 / 5 / 1 deg/step]
*ENG [1 to 1440 / 300 / 1 minute/step]