Solutions When No Image Appears On An External Monitor; Solutions When "Not Supported" Message Appears; Solutions When Only A Partial Image Appears - Epson PowerLite 2040 User Manual

2. Click the Arrangement tab.
3. Select the Mirror Displays checkbox.
Parent topic:

Solutions When No Image Appears on an External Monitor

If no image appears on a connected external monitor, try the following solutions:
• Make sure a VGA cable is connected to your computer and the projector's Computer1 port.
• Make sure your external monitor's cable is connected to the monitor and to the projector's Monitor
Out port.
• Make sure you set the Monitor Out Port setting to Monitor Out.
Parent topic:
Related references
Projector Setup Settings - Extended Menu

Solutions When "Not Supported" Message Appears

If the "Not Supported" message appears, try the following solutions:
• Make sure the correct input signal is selected on the Signal menu.
• Make sure the computer's display resolution does not exceed the projector's resolution and frequency
limit. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)
• As a test, try setting the computer's display resolution to the lowest possible setting, and then
gradually increase it as necessary.
Parent topic:
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:
• Press the Auto button on the remote control to optimize the image signal.
• Make sure the Resolution setting in the Signal menu is set correctly to for the input signal.
Solutions When "No Signal" Message Appears
Solving Image or Sound Problems
Solving Image or Sound Problems
197