Selecting A Signal Sourc Or; Look Over The Layout Of Terminals E - Philips 24PFL5555 User Manual

Language: using the left or right direction button to
select your desired menu language.
Note: The available languages might differ depending
on the model.
Color System: use the right direction or OK button
to display the selectable options, then press the up or
down direction button to select your desired color system
and press OK to confirm.
(Note: The available color system might differ depending
on the model.Color system for india:PAL. )
Child Lock : Press the right or OK button to enter,then
use the number buttons to input the password
(The default is 0000). Then press the left or right direction
button to select the limit time. To cancel the limit, select
Off. And you can also change the password: select the
PW Modify item and press the right direction or OK button
to enter, then enter a new password twice.
Note: If you forget the password, enter 0432 to
override any existing codes.
Time Setting: Press the up or down direction button to
select the Time Setting item, then press the right
direction or OK button to enter.
Setting
Smart Switch
Startup Setting
Language
Color System
Child Lock
Time Setting
Restore to Default
Current Time: press the left, right, up, down direction
button to set the current time.
Turn on Repeat: select the times to turn on the TV at a
specific time, press the left or right direction button to
toggle among Off, Once and EveryDay.
(Note: if Off selected, the Turn on Time, Wake Source
and Wake Channel are not adjustable.)
Turn on Time: press the left, right, up, down direction
button to set the turn on time.
Wake Source: press the left or right direction
button to select the wake up signal source.
Wake Channel: press the left or right direction
button to select a wake up channel.
(Note: Only when the wake up source is TV, this
function can be available.)
Turn off Repeat: select the times to turn on the TV at
a specific time, use the left or right direction button to
toggle among Off, Once and EveryDay.
(Note: if Off selected, the Turn off Time is not adjustable.)
12 EN
Current Time --:--
Off
Turn on Repeat Off
Default
Turn on Time --:--
English
Wake Source TV
Auto
Wake Channel 1
Turn off Repeat Off
Turn off Time --:--
Sleep Time Off
Turn off Time: press the left, right, up, down direction
button to set the turn off time.
Sleep Time: sets a period of time after which the TV
set goes into standby mode, use the left or right
direction button to set the period (240 minutes maximum).
To disable this function, select Off.
Restore to default: restores all the settings to defaulted
settings in factory.
Press Menu to return or Exit to close the menu.
Note: For some models, the Motion Enhance option may
be available.
Motion Enhance: This function is used to cancel motion
judder. Select the Motion Enhance option, then use the
left or right direction button set the Motion enhance effect:
Low, Middle, High and Off.
Selecting a Signal Source or Look
over the Layout of Terminals
Display the menu by pressing the Menu button. Press the
left or right direction button to select the Source icon and
press the up or down direction or OK button to display the
Source menu.
Source
YPbPr PC
TV
HDMI1 HDMI2 AV 1
AV 2 Layout
Selecting a Signal Source
1. Press the up, down, left or right direction button to
select your desired source.
(Note: The available source might differ depending
on the model.)
2. Press the OK button to confirm the selection.
Note: You can press the SOURCE button on the remote
control to switch the source. But if the SMART switch
function is on, pressing the source button shall result in
switching between the connected sources only .
Look over the Layout of Terminals
1. Press the up, down, left or right direction button to select
Layout and press OK to display Interface Status.
2. Press the up, down, left or right direction button to look
over.
3. Press Menu to return or Exit to close the menu.