Table of Contents
Advertisement
Preset and watch TV
The following is how to use the On/Off key (
off the TV set. (Press the key Channel +/- in standby mode may power on the unit,
its the same for the side panel and the remote control.
Power On/Off
1. While switching on the AC power supply, the red indicator lamp stands for standby
mode, while the blue indicator lamp stands for power on.
2. If the TV set is in standby mode, press the On/Off key on the remote control to
power on.
3. Pressing on the On/Off key on the remote control may enter standby mode again.
4. If you don't use the TV set for a long period, unplug the power cord of the TV set
from the socket to save electric energy, because the TV set consumes electricity
even in standby mode.
Auto Standby function
When there is no signal input to the TV set, in order to protect the unit and reduce
power consumption, the TV set may switch to standby mode after 30 minutes if it
is not in PC mode. (It will enter standby mode 30 seconds later if the PC has no
signal.)
Selecting input signal for TV program
If the TV set is not in the TV mode, the
following methods may be used to select
TV program:
1. Press the signal source key on the
remote control to pop out signal source
menu on the TV screen (as shown in the
right diagram).
Press the / key to select the option TV,
and then press > key or OK key to confi rm
switching to TV input terminal. After such
switching, the signal source selection menu
disappears, and the information on the
current signal source is displayed on the up
right corner of the screen. Repeatedly pressing this key may
exit the signal source menu. If no other operations are made,
the signal source menu will disappear in 5 seconds.
2. Pressing the CH+/- key or up/down / key or number key
may also return to TV mode.
How to select TV program
Selecting TV program
1. Selecting with number key directly
• Press the number key directly to select the desired number
of channel.
2. Selecting with the CH+/- key
• Press CH+ key or up key to select the channel number in
the increasing direction.
• Press CH- key or down key to select the channel number in
the decreasing direction.
Selecting TV volume
Press the VOL+/- key or left/right key to adjust to the desired
volume.
) on the TV remote control to turn on/
18
TV
CVBS-1
CVBS-2
S-Video
YPbPr
HDMI-1
HDMI-2
HDMI-3
VGA
Advertisement
Table of Contents
