Channel Edit; Use More Of Your Tv; Adjusting The Picture - Philips 24PFL5555 User Manual

Channel Edit

You can use this function to skip a channel or swap two
channels.
1. Activate the Channel menu and p
direction button to select
2. Press the right direction or OK button to enter the
Channel Edit menu.
Channel Edit
Current Channel
Target Channel.
Skip
Swap
Skipping a Channel
If a channel was stored twice or its reception is poor, you
can simply skip it. The skipped channels can not be
selected by pressing the CH +/- buttons.
1. Press the up or down direction button to
Current Channel option and press the left or right
direction button to select the channel number to be
skipped.
2. Press the up or down direction button to select
Skip option and press the left or right
to select Yes.
3. Press Menu to return or Exit to close the menu.
Swapping Two Channels
1. Press the up or down direction button to
Current Channel option and press the left or right
direction button to select a channel number.
2. Press the up or down direction button to select
Target Channel option and press the left or right
button to select the channel number to be swapped.
3. Press the up or down direction button to select
SWAP option and press the left, right
button to SWAP.
10 EN
ress the up or down
the Channel Edit option.
1
1
Yes
?
select the
the
direction button
select the
the
direction
the
direction or OK

5 Use more of your TV

Adjusting the Picture

The menus for adjusting the picture are used to obtain the
best picture setting according to your preference, the type
of programme you are watching and the ambient lighting.
Display the menu by pressing the Menu button. Press the
left or right direction button to select the Picture icon and
press the up or down direction or OK button to display
the Picture menu. The Picture options are as below:
BackLight
Picture Mode
Scale
Brightness
Contrast
Saturation
Sharpness
Tint
Color Temperature
Natural Light
Dyanmic Contrast
Note: Some options may not be available for certain
signal sources.
Back Light: this option can be used to adjust the
brightness of the backlight, depending on room lighting.
Use the left or right direction button to adjust.
Picture Mode: use the
display the selectable options, then press the up or down
direction button to scroll
Standard, Bright, Soft or
Note: When selecting Standard, Bright, Soft, the Back
Light will restore to the defaulted setting in factory. You
are recommended to use the Bright mode for vivid palette.
Scale: use the right direction or OK
the selectable options, then press the up or down direction
button to scroll through the picture size: 4:3, Full,
Wide Screen, Original and Nature, (Note: some options may
be not selectable for certain signal sources.) and press OK
to confirm.
Note: You are recommended to use the full screen mode.
Do not use the display mode with black bands on both
sides of the picture (such as 4:3) for long
time, otherwise the TV screen may be damaged
permanently.
Brightness: adjusts the brightness of the picture.
Contrast: adjusts the difference between the light and
dark areas of the picture.
Saturation : adjusts the richness of color.
Sharpness: adjusts the crispness of the edges in the
picture.
Picture
80
Standard
Full
50
50
50
50
0
Normal
Off
Off
right direction or OK button to
through the picture preset settings:
Personal and press OK to confirm. ,
button to display
Subtitle ,