Get Started; Position The Tv; Insert The Remote Control Batteries; Connect The Antenna Or Cable - Philips 22PFL3504D/F7E User Manual

4 Get Started

This section supplements information in the Quick Start. For
information about how to mount and install your TV, refer to the Quick
Start.

Position the TV

Warning
•
Do not insert the power plug into the wall socket before all the connections are
made.
•
Large screen TVs are heavy. Two people are required to carry and handle a large
screen TV.
•
Before you move the TV, disconnect the cables to prevent breakage.
In addition to reading and understanding the safety instructions,
consider the following before positioning your TV:
• Ensure that you always have easy access to the AC power cord or
plug to disconnect the TV from the power.
• If the TV is mounted on a swivel base, ensure that no strain is
placed on the AC power cord when the TV is swiveled. Strain on
the AC power cord can loosen connections.
• The ideal viewing distance for watching TV is three times its screen
size.
• Position the TV where light does not fall on the screen.
• Connect your devices before you position the TV.
Use a Kensington lock
There is a Kensington security slot on the back of the TV. Prevent theft
by looping a Kensington lock between the slot and a permanent object,
such as a heavy table.
EN
8

Insert the Remote Control Batteries

1
2
3

Connect the Antenna or Cable

COMPONENT DIGITAL PC-IN
AUDIO OUT
(COAXIAL) AUDIO
Y
HDMI 1-IN
Pb L L
AUDIO AUDIO
Pr R R
Connect to an antenna
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Contact your local content provider or your local electronics retailer if
you are unsure about what HDTV programs are available in your area.
Broadcasters are transitioning from analog to digital TV. This means that
a given broadcaster can have channels available either in analog or in
digital, or both analog and digital at the same time.
The TV produces stereo sound only if a stereo signal is broadcast.
Connect to a cable
When your TV is connected to the cable socket, you might receive free
digital and high defi nition programs (depending on your cable provider).
The channel number for digital and high defi nition channels includes a
dot ". " For example, 11.1, 46.30, 108.201. Contact your cable provider
for more information.
Slide the battery cover off the back of the remote control.
Insert the 2 supplied batteries (AAA). Be sure the + and - ends of
the batteries line up with the markings inside the case.
Slide the cover back into position.
Note
•
Remove the batteries if not using the remote control for an extended period of time.
Cable