Add Channels; Optimize The Signal Quality From Your Antenna - Philips 22PFL3504D/F7E User Manual

2
to select the channel you want to remove, then press OK.
Press or
PICTURE
SOUND
SETUP
Highlight channels for Ch Up/Down key
FEATURES
selection.
LANGUAGE
Ch Select
• The channel display for the removed channel darkens. You will
not be able to select the channel again using CH +/-.
• To reactivate a removed channel, press
The registered channels are highlighted.
• When you remove a major channel, its minor channels are
removed as well.
Note
•
The channel with the [DTV] indicated on the display is ATSC. Otherwise the channel is NTSC.
3
Press MENU to exit.

Add Channels

This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setup.
1
Press MENU on the remote control and [SETUP] >
[Add Channels].
PICTURE Autoprogram
SOUND Channel List
SETUP Add Channels
FEATURES Antenna
LANGUAGE
EN
22
DTV 40.1
DTV 40.2
DTV 40.3
BACK
Back
Watch/Skip
OK
or and press OK.
2
Press a number (1 to 135) to enter the number of the channel you
want to add, then press OK.
PICTURE
SOUND
For analog channels,
select a channel to be
SETUP
added using number keys.
FEATURES
For digital channels,
LANGUAGE
you must perform
Autoprogram function.
3
Press MENU to exit.
Note
•
If setup completes successfully, [Added to the channel list] is displayed.
•
If external input is used, it is not possible to register the channel and [Unavailable] will be
displayed on the TV screen.
•
By pressing or , you can select the memorized channels only.
Optimize the Signal Quality from Your
Antenna
You can optimize your signal quality by tuning in ATSC channels with
weak signals, and adjusting the antenna.
1
Press MENU on the remote control and select [SETUP] >
[Antenna].
2
Press OK to confi rm your choice.
3
Press a number (1 to 135) or press CH+ or CH- to select the
channel for which you want to check the digital signal strength.
4
Press MENU to exit.
Add channels
BACK
Back
Ch Change
10