Samsung STP131 Series Operator's Manual page 16

ESC G n
[Name] Turn on/off double-strike mode.
G
[Format] ASCII ESC
Hex 1B 47
Decimal 27 71
0 < n < 255
[Range]
[Description] Turns emphasized mode on or off.
When the LSB is 0, double-strike mode is turned off.
When the LSB is 1, double-strike mode is turned on.
ESC J n
[Name] Print and feed paper.
[Format] ASCII ESC J
Hex 1B 4A
Decimal 27 74
0 < n < 255
[Range]
[Description] Prints the data in the print buffer and feeds the paper [n x vertical or
horizontal motion unit] inches.
ESC R n
[Name] Select an international character set.
[Format] ASCII ESC R
Hex 1B 52
Decimal 27 82
0 < n < 10
[Range]
[Description] Selects an international character set n from the following table.
n Character set
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark I
[Default] n = 0
n
n
n
n
n
n
n
n
n
n Character set
5 Sweden
6 Italy
7 Spain
9 Norway
10 Denmark II
ESC V n
[Name]
[Format]
[Range]
[Description]
n
0, 48
1, 49
ESC \ nL nH
[Name] Set relative print position.
[Format] ASCII
Hex
Decimal
0 < nL < 255
[Range]
0 < nH < 255
[Description] Selects the print starting position based on the current position by
using the horizontal or vertical motion unit.
This command sets the distance from the current position to
[(nL + nH x 256) x horizontal or vertical motion unit]
ESC a n
[Name] Select justification.
[Format] ASCII
Hex
Decimal
0 < n < 2
[Range]
48 < n < 50
[Description] Aligns all the data in one line to the specified position.
n selects the type of justification as follows:
n
0, 48
1, 49
2, 50
31 32
ESC V n
1B 56 n
27 86 n
Function
ESC \ nL nH
1B 5C nL nH
27 92 nL nH
ESC a n
1B 61 n
27 97 n
Justification
Left justification
Centering
Right justification