Table of Contents
Advertisement
Command
Name
ESC i
Partiall cut(one point center uncut)
General pulse
ESC p
ESC t
Select character code table
Turn upside-down printing mode on/off
ESC {
GS !
Select character size
Define downloaded bit image
GS *
GS /
Print downloaded bit image
GS :
Start/end macro definition
GS B
Turn white/black reverse printing mode on/off
GS H
Select printing position of HRI characters
GS I
Transmit print ID
GS L
Set left margin
Set vertical and horizontal motion units
GS P
GS V
Select cut mode and cut paper
Set printing area width
GS W
GS ^
Execute macro
Select font for HRI characters
GS f
GS h
Set bar code height
print bar code
GS k
GS r
Transmit status
Set bar code width
GS w
Command classification
Executing :
Printer executes the command, which does not affect the following data.
Setting
: Printer uses flags to make setting, and those setting affect the following data.
Standard mode
:
Enagled
:
Enabled only when the command is used at the beginning of a line.
(
)
:
Enabled only when data is not present in the buffer.
Page mode
:
Enagled
:
Only setting is possible.
Disabled
:
Parameters are processed as printable data.
:
Command codes and parameters are all ignored.
Ignored
Command Classification
Standard
Mode
Executing
Setting
(
)
(
)
(
)
(
)
23
Control Commands
HT
[Name]
Horizontal tab.
[Format]
ASCII
HT
Hex
09
Decimal
9
[Description]
Moves the print position to the next horizontal tab position.
LF
[Name]
Print and line feed.
[Format]
ASCII
LF
Hex
0A
Decimal
10
[Description]
Prints the data in the print buffer an feeds one line based on the current
line spacing.
FF
[Name]
Print and return o standard mode in page mode.
[Format]
ASCII
FF
Hex
0C
Decimal
12
[Description]
Prints the data in the print buffer collectively and returns to standard mode.
CR
[Name]
Print and carriage return.
[Format]
ASCII
HT
Hex
0D
Decimal
13
[Description]
When automatic line feed is enabled, this command functions the same as
LF; when automatic line feed is disabled, this command is ignored.
CAN
[Name]
Cancel print data in page mode.
[Format]
ASCII
CAN
Hex
18
Decimal
24
[Description]
In page mode, deletes all the print data in the current printable area.
24
Advertisement
Table of Contents
