Deploying The Agent Software When Protecting An Agent - Dell DL4300 Deployment Manual

NOTE: If the client already has an agent installed, the installation program will verify the version
of the agent. If the agent that you are trying to push is newer than the installed version, the
installation program offers to upgrade the agent. If the host has the current agent version
installed, then the bulk deploy will initiate protection between the AppAssure Core and agent.
4. In the list of clients, select all clients and click Verify to ensure that the machine is active and the
agent can be deployed.
5. When the Message column confirms the machine is ready, click Deploy.
6. To monitor the status of the deployment, select the Events tab.
After the agent is deployed, a backup of the client begins automatically.

Deploying the agent software when protecting an agent

You can download and deploy agents during the process of adding an agent for protection.
NOTE: This procedure is not required if you have already installed the Agent software on a machine
that you want to protect.
To deploy agents during the process of adding an agent for protection:
1. From the Protect Machine → Connect dialog box, after entering the appropriate connection
settings, click Connect.
The Deploy Agent dialog box is displayed.
2. Click Yes to deploy the Agent software remotely to the machine.
The Deploy Agent dialog box is displayed.
3. Enter logon and protection settings as follows:
• Host name — Specifies the host name or IP address of the machine that you want to protect.
• Port — Specifies the port number on which the Core communications with the Agent on the
machine. The default value is 8006.
• User name — Specifies the user name used to connect to this machine; for example,
administrator.
• Password — Specifies the password used to connect to this machine.
• Display name — Specifies a name for the machine which appears on the Core Console. The
display name could be the same value as the host name.
• Protect machine after install — Selecting this option enables AppAssure to take a base snapshot
of the data after you add the machine for protection. This option is selected by default. If you
deselect this option, then you must force a snapshot manually when you are ready to start data
protection. For more information about manually forcing a snapshot, see topic 'Forcing A
Snapshot' in Dell DL4300 Appliance User's Guide.
• Repository — Select the repository in which to store data from this agent.
NOTE: You can store data from multiple agents in a single repository.
• Encryption Key — Specifies whether encryption should be applied to the data for every volume
on this machine to be stored in the repository.
NOTE: You define encryption settings for a repository under the Configuration tab in the
Core Console.
4. Click Deploy.
27