Malmbergs LHG-30116M Instruction Manual page 23

Your spray lance has two main settings. These setting can be varied by turn-
ing the nozzle attachment (6) at the end of the lance.
Turn the nozzle (6) anti-clockwise for a pointed jet or turn the nozzle (6)
clockwise for a flat jet.
Always ensure that the trigger is closed and the pressure washer switched off
before changing the nozzle settings.
When using your pressure washer on high – pressure settings, the recom-
mended working distance between the nozzle and the object or surface to
be cleaned is 30 cm. It can be closer if required for patios or masonry.
Aim the lance towards the object to be cleaned making sure the recom-
mended working distance is used for reference. Squeeze the lance trigger
until the water starts flowing, then switch on the pressure washer.
Important
Remember frost will damage your pressure washer if it has not been com-
pletely emptied of water after use. Always store in a frost free area.
Note: Frost damage is not covered by the warranty.
23