Use the preferences menu to customise your
TV settings.
Press
.
Select
>
.
•
: Optimises TV settings for
your location - home or shop.
•
bar when you adjust the volume.
•
information about the TV channel
every time you switch channels.
Select
information or
channel information.
•
disables the universal access menu.
•
: Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
•
settings of connected devices and
uses the settings of the TV. (Available
only when you activate Easylink).
•
: For shop mode only. Sets
the location of the e-sticker.
Press
to select your preference.
Press
.
Press
to exit.
>
: Displays the volume
: Displays
to view channel
to turn off the
: Enables or
: Overrides the
You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT1 (SCART).
Map channels from a decoder or descrambler.
Press
.
Select
>
.
Press
to enter
Press
to select
to enter.
Select one channel to map to the
decoder / descrambler channel and press
to confirm.
Select
, then press
Select
(SCART) the connector
used by the decoder / descrambler.
Press
.
Press
to exit.
•
Select
if you do not want to map to
the decoder / descrambler channel.
>
menu.
, then press
to enter.
25