Factory Reset; Watch Updates - Huawei WATCH 2 Manual

Leo Proudcts Online Help-es
Leo Proudcts Online Help-es
To manually set the date and time, go to Settings > System > Date & time and disable
automatic setting. You can then manually set the time zone, time, 24-hour time on your watch.

10.8 Factory reset

If you restore your watch to the factory settings, all data stored on your watch will be deleted.
You will also need to pair the watch with your phone again.
You can restore your watch to the factory settings by one of the following two methods.
M ethod 1: Press the power button, and choose Settings > System > Disconnect and reset.
M ethod 2: When your watch is paired with your phone over Bluetooth, touch
upper right corner of the Android Wear app, choose your watch, and touch UNPAI R
WATCH.

10.9 Watch updates

Updating your watch
Your watch will notify you when an update is available. Touch the confirm icon to download
the update. This type of updates will usually upgrade the pre-installed apps and improve the
watch performance.
If you fail to update your watch, perform the following operations:
Scenario 1: If your watch can be powered on, try updating your watch for the next time.
Scenario 2: If your watch cannot be powered on, go to a service center for support.
Updating apps in your phone
If you have updated an app in your phone, the app will also be updated on your watch after a
certain period.
Issue 01 (2017-03-23)
After you set the date and time manually, the message synchronization may not work properly if the
settings are different from your phone. It is recommended that you set the watch to automatically
synchronize the date and time with your phone.
You cannot manually check for watch updates.
Your watch must be paired with your phone over Bluetooth. If your phone is connected to the
network and your watch is being charged, the updates will be downloaded automatically.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Settings
on the
40