Table of Contents
Advertisement
On your device, go to Settings > About to view the name of your device under Device
•
name.
Alternatively, open the Health app, then touch Devices and your device name. The name of
•
the connected device is the Bluetooth name.
Viewing the MAC address:
On your device, go to Settings > About to view the MAC address of your device.
Viewing the Serial Number:
On your device, go to Settings > About to view the serial number of your device.
Viewing the model:
On your device, go to Settings > About to view the model of your device.
•
The laser-engraved characters after the word "MODEL" on the back of the device indicate
•
the model name.
Viewing the version information:
On your device, go to Settings > About to view the version of your device.
•
Open the Health app, touch Devices then your device name, and touch Firmware update
•
to view the version number of your device.
Powering on, powering off, and restarting the watch
Powering on
Press and hold the Up button.
•
Charge the device.
•
Powering off
Press and hold the Up button, and then touch Power off.
•
Press the Up button and go to Settings > System > Power off.
•
If the battery level is critically low, the watch will vibrate and then automatically power off.
•
If the watch is not charged promptly after the standby time expires, it will automatically
•
power off.
Restarting
Press and hold the Up button, and then touch Restart.
•
Press the Up button and go to Settings > System > Restart.
•
Force restarting
Press and hold the Up button for at least 16 seconds.
Restoring the device to its factory settings
Method 1: Go to Settings > System > Reset on your watch.
More
36
Advertisement
Table of Contents
