Front/Rear View - Kenmore 348.71395610 Use & Care Manual

Front/Rear View

1. VOL -/+
Press to adjust the volume.
2. CH
Press to select a channel.
3. MENU
Display the main menu.
4. SOURCE
Press to select among different input signal sources.
5. POWER
Switch the TV between On/Standby mode/Off.
6. IR (Infrared Receiver)
Receives IR signals from the remote control.
7. POWER Indicator
Does not illuminate when the TV is in standby mode. Illuminates blue when the TV is turning on, and then
turns off after 20 seconds. (This indicator will also blink during normal operation when any button on the
remote is depressed.)
PREPARATION
-
5
En