Customizing Tv Settings; Initial Setup - Kenmore 348.71395610 Use & Care Manual

CUSTOMIZING TV SETTINGS

Initial Setup

• Plug the power cord into a power socket after you have completed all the physical connections. Once plugged in, the
TV will enter Standby Mode and the LED indicator will not illuminate.
• In Standby Mode, press the
will turn blue，and then turns off 20 seconds later.
• The first time you turn the TV on, it will go into the Setup Wizard. Press ▲/▼/
mode and press OK to confirm.
Home Mode : The picture mode will be Standard if you select this mode.
Retail Mode : Select Dynamic Mode if you would like your picture to be brighter. At times this mode may use more
energy to operate the Volume/Sound Mode and Picture Mode
• The SLEEP-MODE Power is less than 0.5 W.
button on the main unit or on the remote control to turn the TV on. The LED indicator
7
• If channels cannot be found, this frame will be displayed automatically.
buttons to select your desired
5
8 9
-
11
En