Operation; Volume Control; Mute Button; Factory Reset - Avermedia AEGIS Quick Manual

OPERATION

E N

Volume Control

Twist the Volume Control Knob to adjust your output volume.
Use the Volume Indicator beneath the knob to keep your output
volume in check. If the indicator continues to blink red, try lowering
your volume, or moving Aegis further away from you.
Moderate Loud Deafening Clipping

Mute Button

When you need some privacy, press the
Mute Button to mute the microphone, press
it again to unmute.
When muted, the Volume Indicator turns off while
the Mute Indicator lights up.

Factory Reset

5 sec
If you experience performance drops after
replacing your speaker or computer, try
resetting your Aegis.
Press and hold the Mute Button for 5 seconds,
until both the Mute and Volume Indicators blink red.
Run Voice Engine again to reoptimize your sound.
05
OPERATION