Getting Started; Before You Start; Connect The Antenna; Connect The Mains - Philips 15/20HF5234 User Manual

4

Getting started

4.1 Before you start

Warning
The connections do not have to be
made before hanging but the cables
must be inserted into connectors of
the TV.

4.2 Connect the antenna

Insert the aerial plug firmly into the 75 Ω :
aerial socket at the bottom of the TV and in
the wall antenna socket.
Connectors at rear of TV
(facing downward)

4.3 Connect the mains

Insert the mains cord (supplied) into the
mains socket at the backside (downward
facing) of the TV and in the wall socket.
Warning
Verify that the mains supply voltage in your
home corresponds to the voltage printed on
the sticker at the rear of the TV.
Plasma
TV
To wall
socket
AC in
LCD
TV
To wall
socket

4.4 Switching on the TV

• To switch on the TV, press the
POWER key on the side of the set. A
blue indicator comes on and after a few
seconds, the screen lights up at the left
hand bottom of the front of the set.
• If the TV set remains in standby mode
(red indicator), press the PROGRAM – / +
key on the side controls or the P – / +
key on the remote control.
Side controls
of TV

4.5 Using the Remote Control

Insert the 2 batteries supplied. Be sure the
(+) and (-) ends of the batteries line up
correctly (inside of case is marked.)
7