Table of Contents
Advertisement
Product Support Tools
4. Run Samsung PST.
5. Change PST's comport setting ( Setup COM Setting ) same as com port of 'SAMSUNG cdma
modem'
6. Select SPH-A940 and then click SW(Software Download) tab.
7. Select 'Emergency" in software download option.
8. Click 'openfile' icon and select the bin file.
9. Click 'Start Software Download' icon.
10. When the downloading process is finished, the A970 power on automatically and the PST shows
"Downloading completed!!".
PRL Download
1.Click "Open PRL1 file" icon and select the PRL file.
2.Click "Start PRL Download" icon.
3. When the downloading process is finished, the A970 will reboot automatically and the PST shows
"Completed PRL Programming"
ERI Download
1.Click "Open ERI1 file" icon and select the PRL file.
2.Click "Start ERI Download" icon.
3. When the downloading process is finished, the A970 will reboot automatically and the PST shows
"Completed ERI Programming"
Setting
Read Data from File
Click "Open mmc" icon to select the name of a file whose extension is "mmc". The values will be read
from the named file, and will initialize the parameter values seen on the Settings screen
Read Data from Phone
Click Read from the Phone icon to upload the current programmable parameters of the phone. The
values are read from the phone, so the phone must have the power ON and be properly connected
to the PST.
NOTE: To actually view the data you need to go to the Edit Items screens.
Edit Items
Click this icon to edit Number Assignment Module (NAM) items or UI items.
1. GeneralNAM : Slot Cycle Index, Service Code
2. NAM1
5-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Advertisement
Table of Contents
