Table of Contents
Advertisement
Product Support Tools
5-2. PST (Product Support Tool)
5-2-1 Getting Started
MAIN MENU SCREEN
1. Double Click on your "Samsung PST for Verizon (SE)"
2. Select SPH-A940
The Main Menu Screen shows the basic tasks that are available.
CAUTION: DO NOT attempt to program phone with a low battery.
5-2-2 Operation Procedure
Information
Click "Read general Information" icon.
Software Download
If the phone works normally, you must proceed below procedures.
Normal Download.
1. Connect PC and SPH-A940 with usb cable
2. Check com port of SAMSUNG CDMA Modem. To check on Com port, first you go to my
computer->property->Hardware->Device Manager ->Modem->Samsung USB Modem. Then go to property
of Samsung USB Modem, and then click on Modem tab. You may see the port number, which is
assigned for Samsung USB Modem.
3. Run Samsung PST.
4 . Change PST's comport setting ( Setup COM Setting ) same as com port of 'SAMSUNG cdma
modem'
5. Select SPH-A940 and then click SW(Software Download) tab.
6. Select 'Normal' in software download option.
7. Click 'openfile' icon and select the bin file.
8. Click 'Start Software Download' icon.
10. When the downloading process is finished, the A970 power on automatically and the PST shows
"Downloading completed!!".
If the phone doesn't works normally, you must proceed below procedures.
Emergency Download.
1. SPH-A940 enters the emergency mode(press simultaneously '9' and 'PWR')
2. Connect PC and SPH-A940 with usb cable
3. Check com port of SAMSUNG CDMA Modem. To check on Com port, first you go to my
computer->property->Hardware->Device Manager ->Modem->Samsung USB Modem. Then go to property
of Samsung USB Modem, and then click on Modem tab. You may see the port number, which is
assigned for Samsung USB Modem.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
5-2
Advertisement
Table of Contents
