Table of Contents
Advertisement
12.5 Upgrading System
Purpose:
The firmware on your NVR can be upgraded by local backup device or remote FTP server.
12.5.1 Upgrading by Local Backup Device
Steps:
1.
Connect your NVR with a local backup device where the update firmware file is located.
2.
Enter the Upgrade interface.
Menu >Maintenance>Upgrade
3.
Click the Local Upgrade tab to enter the local upgrade menu, as shown in Figure 12. 13.
4.
Select the update file from the backup device.
5.
Click the Upgrade button to start upgrading.
6.
After the upgrading is complete, reboot the NVR to activate the new firmware.
12.5.2 Upgrading by FTP
Purpose:
Ensure the network connection of the PC (running FTP server) and the device is valid and correct. Run the FTP
server on the PC and copy the firmware into the corresponding directory of your PC.
Figure 12. 13 Local Upgrade Interface
155
Advertisement
Table of Contents
