DSC -N114 User Manual
  1. Manuals
  2. Brands
  3. DSC Manuals
  4. DVR
  5. DSC-N114
  6. User manual
DSC -N114 User Manual

DSC -N114 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DSC-N114_Network_Video_Recorder
User Manual
8200-1116-06

Advertisement

Table of Contents
loading

Summary of Contents for DSC DSC-N114

  • Page 1 DSC-N114_Network_Video_Recorder User Manual 8200-1116-06...

  • Page 3: Preventive And Cautionary Tips

    Preventive and Cautionary Tips Before connecting and operating your device, please be advised of the following tips: • Ensure unit is installed in a well-ventilated, dust-free environment. • Unit is designed for indoor use only. • Keep all liquids away from the device. •...

  • Page 4: Trademarks And Registered Trademarks

    Trademarks and Registered Trademarks • Windows and Windows mark are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. • HDMI, HDMI mark and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. •...

  • Page 5: Table Of Contents

    TABLE OF CONTENTS Chapter 1 Introduction ..........................8 Front Panel ............................9 IR Remote Control Operations ...................... 10 USB Mouse Operation ........................13 Input Method Description ......................14 Rear Panel ............................. 15 Chapter 2 Getting Started ......................... 16 Starting Up and Shutting Down the NVR ..................17 Using the Wizard for Basic Configuration ....................
  • Page 6 6.1.1 Playing Back by Channel ....................61 6.1.2 Playing Back by Time ....................... 63 6.1.3 Playing Back by Event Search ..................64 6.1.4 Playing Back by Tag ......................66 6.1.5 Smart Playback ......................... 70 6.1.6 Playing Back by System Logs ..................73 6.1.7 Playing Back External File ....................
  • Page 7 9.4.2 Exporting Network Packet ....................124 9.4.3 Checking the Network Status ..................125 9.4.4 Checking Network Statistics ................... 126 Chapter 10 HDD Management ......................... 127 10.1 Initializing HDDs ........................128 10.2 Managing Network HDD ......................129 10.3 Managing HDD Group ........................ 131 10.3.1 Setting HDD Groups .......................
  • Page 8 Troubleshooting ............................. 170 List of Compatible IP Cameras ......................176...

  • Page 9: Chapter 1 Introduction

    Chapter 1 Introduction...

  • Page 10: Front Panel

    1.1 Front Panel Figure 1. 1 Front Panel Table 1. 1 Description of Control Panel Buttons Name Description Power Power indicator turns yellow when system is running. Status indicator blinks red when data is being read from or written Status Status to HDD.

  • Page 11: Ir Remote Control Operations

    1.2 IR Remote Control Operations The NVR may also be controlled with the included IR remote control, shown in Figure 1. 2. Batteries (2× AAA) must be installed before operation. Figure 1. 2 Remote Control The keys on the remote control closely resemble the ones on the front panel. See Table 1.2. Table 1.
  • Page 12 Name Description EDIT Button Edit text fields. When editing text fields, it will also function as a Backspace button to delete the character in front of the cursor. On checkbox fields, pressing the button will check the checkbox. In PTZ Control mode, the button adjusts the iris of the camera. In Playback mode, it can be used to generate video clips for backup.
  • Page 13 Name Description Reserved for future usage. RESERVED F1 Button Select all items on the list when used in a list field. In PTZ Control mode, it will turn on/off PTZ light (if applicable). In Playback mode, it is used to switch between play and reverse play. Buttons to adjust the iris, focus and zoom of a PTZ camera.

  • Page 14: Usb Mouse Operation

    1.3 USB Mouse Operation A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this NVR. To use a USB mouse: Plug USB mouse into one of the USB interfaces on the front panel of the NVR. 2. The mouse should automatically be detected. If in a rare case that the mouse is not detected, the possible reason may be that the two devices are not compatible, please refer to the recommended the device list from your provider.

  • Page 15: Input Method Description

    1.4 Input Method Description Figure 1. 3 Soft Keyboard Description of the buttons on the soft keyboard: Table 1. 4 Description of the Soft Keyboard Icons Icon Description Icon Description English Exit Enter Symbols Lowercase/Uppercase Backspace Space...

  • Page 16: Rear Panel

    1.2 Rear Panel Figure 1. 4 DSC-N114-8/ DSC-N114-16 Item Description Power Supply DC 12V power supply. Audio In RCA connector for audio input. HDMI Interface HDMI video output connector. LAN Network Interface 1 10 /100 /1000 Mbps self-adaptive Ethernet interface Audio Out RCA connector for audio output.

  • Page 17: Chapter 2 Getting Started

    Chapter 2 Getting Started...

  • Page 18: Starting Up And Shutting Down The Nvr

    2.1 Starting Up and Shutting Down the NVR Purpose: Proper startup and shutdown procedures are crucial to expanding the life of the NVR. Before you start: Check that the voltage of the extra power supply is the same with the NVR’s requirement, and the ground connection is working properly.

  • Page 19: Using The Wizard For Basic Configuration

    Using the Wizard for Basic Configuration By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure 2. 3. Figure 2. 3 Start Wizard Interface Operating the Setup Wizard: 1. The Setup Wizard can walk you through some important settings of the NVR. If you do not want to use the Setup Wizard at that moment, click the Cancel button.
  • Page 20 Click the Next button to enter the date and time settings window, as shown in Figure 2. 5. Figure 2. 5 Date and Time Settings 6. After the time settings, click Next button which takes you back to the Network Setup Wizard window, as shown in Figure 2.
  • Page 21 Figure 2. 7 HDD Management 8. To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD. 9. Click Next button. You enter the Adding IP Camera interface. Click Search to find online IP Camera. Select the IP camera to be added, and click the Add button. Figure 2.
  • Page 22 Figure 2. 9 Record Settings Click OK to complete the startup Setup Wizard.

  • Page 23: Adding And Connecting The Ip Cameras

    2.2 Adding and Connecting the IP Cameras 2.2.1 Adding the Online IP Cameras Purpose: The main function of the NVR is to connect the network cameras and record the video got from it. So before you can get a live view or record of the video, you should add the network cameras to the connection list of the device. Before you start: Ensure the network connection is valid and correct.

  • Page 24: Editing The Connected Ip Cameras And Configuring Customized Protocols

    4. To add other IP cameras: 1) Click the Custom Adding button to pop up the Add IP Camera (Custom) interface. Figure 2. 12 Custom Adding IP Camera Interface 2) You can edit the IP address, protocol, management port, and other information of the IP camera to be added.
  • Page 25 Figure 2. 13 Edit the Parameters 2. Click OK to save the settings and exit the editing interface. Configuring the customized protocols Purpose: To connect the network cameras which are not configured with the standard protocols, you can configure the customized protocols for them.

  • Page 26: Chapter 3 Live View

    2. Choose the protocol type of transmission and choose the transfer protocols. Before customizing the protocol for the network camera, you have to contact the manufacturer of the network camera to consult the URL (uniform resource locator) for getting main stream and sub-stream. The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path].

  • Page 27: Introduction Of Live View

    3.1 Introduction of Live View Live view shows you the video image getting from each camera in real time. The NVR automatically enters Live View mode when powered on. It is also at the very top of the menu hierarchy, thus pressing the ESC many times (depending on which menu you’re on) brings you to the Live View mode.

  • Page 28: Operations In Live View Mode

    3.2 Operations in Live View Mode In live view mode, there are many functions provided. The functions are listed below. • Single Screen: showing only one screen on the monitor. • Multi-screen: showing multiple screens on the monitor simultaneously. • Auto-switch: the screen is auto switched to the next one.

  • Page 29: Quick Setting Toolbar In Live View Mode

    3.2.2 Quick Setting Toolbar in Live View Mode On the screen of each channel, there is a quick setting toolbar which shows when you single click the mouse in the corresponding screen. Figure 3. 2 Quick Setting Toolbar Table 3. 3 Description of Quick Setting Toolbar Icons Icon Description Icon...
  • Page 30 Figure 3. 4 Image Settings- Preset You can set the image parameters like brightness, contrast, saturation and hue. Figure 3. 5 Image Settings- Customize Live View Strategy can be selected to set strategy, including Real-time, Balanced, Fluency. Figure 3. 6 Live View Strategy...

  • Page 31: Adjusting Live View Settings

    3.3 Adjusting Live View Settings Purpose: Live View settings can be customized according to different needs. You can configure the output interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc. Steps: Enter the Live View Settings interface.
  • Page 32 Figure 3. 8 Live View- Camera Order Select a View mode in Select the small window, and double-click on the channel number to display the channel on the window. If you do not want the camera to be displayed on the live view interface, click the corresponding to stop it.

  • Page 33: User Logout

    3.4 User Logout Purpose: After logging out, the monitor turns to the live view mode and if you want to do some operation, you need to enter user name and password tog in again. Steps: 1. Enter the Shutdown menu. Menu>Shutdown Figure 3.

  • Page 34: Chapter 4 Ptz Controls

    Chapter 4 PTZ Controls...

  • Page 35: Configuring Ptz Settings

    4.1 Configuring PTZ Settings Purpose: Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you control the PTZ camera. Before you start: Check that the PTZ and the NVR are connected properly through RS-485 interface. Steps: 1.

  • Page 36: Setting Ptz Presets, Patrols & Patterns

    4.2 Setting PTZ Presets, Patrols & Patterns Before you start: Please make sure that the presets, patrols and patterns should be supported by PTZ protocols. 4.2.1 Customizing Presets Purpose: Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place. Steps: 1.

  • Page 37: Calling Presets

    Figure 4. 3 More Presets 4.2.2 Calling Presets Purpose: This feature enables the camera to point to a specified position such as a window when an event takes place. Call preset in live view mode: Steps: 1. Press the PTZ button on the front panel or click the PTZ Control icon in the quick setting bar to enter the PTZ setting menu in live view mode.
  • Page 38 on to the next key point. The key points are corresponding to the presets. The presets can be set following the steps above in Customizing Presets. Steps: 1. Enter the PTZ Control interface. Menu>Camera>PTZ 2. Select patrol number in the drop-down list of patrol. PTZ- Add Key Point 3.

  • Page 39: Calling Patrols

    4.2.4 Calling Patrols Purpose: Calling a patrol makes the PTZ to move according the predefined patrol path. Calling patrol in live view mode: Steps: 1. Press PTZ control on the front panel or on the remote, or click PTZ Control icon on the quick setting panel, to show the PTZ control panel.

  • Page 40: Calling Patterns

    Figure 4. 7 PTZ- Pattern 4.2.6 Calling Patterns Purpose: Follow the procedure to move the PTZ camera according to the predefined patterns. Call pattern in live view mode. Steps: 1. In the live view mode, press PTZ control on the front panel or on the remote control, or click PTZ Control icon on the quick setting panel.

  • Page 41: Ptz Control Panel

    4.3 PTZ Control Panel To enter the PTZ control panel, there are two ways supported. OPTION 1: In the PTZ settings interface, click the PTZ button on the lower-right corner which is next to the Back button. OPTION 2: In the Live View mode, you can press the PTZ Control button on the front panel or on the remote control, or choose the PTZ Control icon Figure 4.

  • Page 42: Chapter 5 Recording Settings

    Chapter 5 Recording Settings...

  • Page 43: Configuring Parameters

    5.1 Configuring Parameters Purpose: By configuring the parameters you can define the parameters which affect the image quality, such as the transmission stream type, the resolution and so on. Before you start: 1. Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. (Menu>HDD>General) Figure 5.
  • Page 44 Figure 5. 3 Recording Parameters Parameters Setting for Recording 1) Select Record tab page to configure. You can configure the stream type, the resolution, and other parameters on your demand. • Pre-record: The time you set to record before the scheduled time or event. For example, when an alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera records it at 9:59:55.
  • Page 45 1) Enter the Sub-stream tab page. Figure 5. 4 Sub-stream Parameters 2) Configure the parameters of the camera. 3) Click Apply to save the settings.

  • Page 46: Configuring Recording Schedule

    5.2 Configuring Recording Schedule Purpose: Set the recording schedule, and then the camera automatically starts/stops recording according to the configured schedule. Steps: Enter the Record Schedule interface. Menu>Record>Schedule Configure Record Schedule Select Record Schedule. Figure 5. 5 Record Schedule Choose the camera you want to configure. Select the check box after the Enable Schedule item.
  • Page 47 Figure 5. 6 Recording Schedule Interface You can click the button to set the accurate time of the schedule. II. To schedule an all-day recording, check the checkbox after the All Day item. Figure 5. 7 Edit Schedule III. To arrange other schedule, leave the All Day checkbox blank and set the Start/End time. Up to 8 periods can be configured for each day.
  • Page 48 Figure 5. 8 Copy Schedule to Other Days V. Click OK to save setting and back to upper level menu. VI. Click Apply in the Record Schedule interface to save the settings. Draw the schedule: Click on the color icons, you can choose the schedule type as continuous or event. Figure 5.
  • Page 49 Figure 5. 10 Copy Schedule to Other Channels...

  • Page 50: Configuring Motion Detection Recording

    5.3 Configuring Motion Detection Recording Purpose: Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the NVR can analyze it and do many actions to handle it. Enabling motion detection function can trigger certain channels to start recording, or trigger full screen monitoring, audio warning, notify the surveillance center and so on.
  • Page 51 Figure 5. 12 Motion Detection- Mask 4) Click Settings, and the message box for channel information pop up. Figure 5. 13 Motion Detection Handling 5) Select the channels which you want the motion detection event to trigger recording. 6) Click Apply to save the settings. 7) Click OK to back to the upper level menu.

  • Page 52: Configuring Alarm Triggered Recording

    5.4 Configuring Alarm Triggered Recording Purpose: Follow the procedure to configure alarm triggered recording. Steps: 1. Enter the Alarm setting interface. Menu> Configuration> Alarm Figure 5. 14 Alarm Settings 2. Click Alarm Input tab and set the alarm parameters. Figure 5. 15 Alarm Settings- Alarm Input Select Alarm Input number and configure alarm parameters.
  • Page 53 Figure 5. 16 Alarm Settings Choose the alarm triggered recording channel. Check the checkbox to select channel. Click Apply to save settings. Click OK to back to the upper level menu. 3. Edit the Alarm triggered record in the Record Schedule setting interface. For the detailed information of schedule configuration, see Chapter Configuring Recording Schedule.

  • Page 54: Configuring Vca Triggered Recording

    5.5 Configuring VCA Triggered Recording Purpose: Perform the following steps to set the VCA alarm and trigger recording of related cameras. Steps: 1. Enter VCA Alarm interface of Camera Management and select a camera you want to detect VCA alarm. Menu>...
  • Page 55 Figure 5. 18 VCA Alarm Handling 3. Select the channels which you want the motion detection event to trigger recording. 4. Click Apply to save the settings. 5. Edit the VCA Alarm Record Schedule. For the detailed information of schedule configuration, see Chapter Configuring Recording Schedule.

  • Page 56: Manual Recording

    5.6 Manual Recording Purpose: Follow the steps to set parameters for the manual record. Using manual record, you need to manually cancel the record. The manual recording is prior to the scheduled recording. Steps: Enter the Manual settings interface. Menu> Manual>Record Or press the REC/SHOT button on the front panel.

  • Page 57: Configuring Holiday Recording

    5.7 Configuring Holiday Recording Purpose: Follow the steps to configure the record schedule on holiday for that year. You may want to have different plan for recording on holiday. Steps: 1. Enter the Record setting interface. Menu > Record > Holiday Figure 5.

  • Page 58: Configuring Hdd Group For Recording

    Figure 5. 21 Edit Holiday Settings 2) Check the checkbox after Enable Holiday. 3) Select Mode from the dropdown list. There are three different modes for the date format to configure holiday schedule. 4) Set the start and end date. 5) Click Apply to save settings.
  • Page 59 Figure 5. 23 Storage Mode Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information, please refer to Chapter 11.4 Managing HDD Group. 3. Select General in the left side menu. 4.

  • Page 60: Files Protection

    5.9 Files Protection Purpose: You can lock the recorded files or set the HDD property to Read-only to protect the record files from being overwritten. Protect file by locking the record files: Steps: 1. Enter Export setting interface. Menu> Export>Normal Figure 5.

  • Page 61: Chapter 6 Playback

    that the file is locked. The record files of which the recording is still not completed cannot be locked. 2) Click to change it to to unlock the file and the file is not protected. Chapter 6 Playback...

  • Page 62: Playing Back Record Files

    6.1 Playing Back Record Files 6.1.1 Playing Back by Channel Purpose: Play back the recorded video files of a specific channel in the live view mode. Channel switch is supported. Instant playback by channel Steps: Choose a channel in live view mode using the mouse and click the button in the quick setting toolbar.
  • Page 63 Front Panel: press PLAY button to play back record files of the channel under single-screen live view mode. Pressing numerical buttons will switch playback to the corresponding channels during playback process. Playback management. The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown in Figure 6.

  • Page 64: Playing Back By Time

    Button Operation Button Operation Button Operation Audio on Start clipping 30s forward 30s reverse Add default tag Add customized tag Pause reverse play/ Reverse play/ Tag management Speed down Single-frame reverse play Scaling up/down the Pause play Speed up time line Previous day Next day Full Screen...

  • Page 65: Playing Back By Event Search

    If there are record files for that camera in that day, in the calendar, the icon for that day is displayed as Otherwise it is displayed as In the Playback interface: The toolbar in the bottom part of Playback interface can be used to control playing process, as shown in Figure 6. Figure 6.
  • Page 66 Figure 6. 7 Motion Search Interface Playback interface. The toolbar in the bottom part of Playback interface can be used to control playing process. Figure 6. 8 Interface of Playback by Event...

  • Page 67: Playing Back By Tag

    Figure 6. 9 Toolbar of Playback by Event Table 6. 2 Detailed Explanation of Playback-by-event Toolbar Button Operation Button Operation Button Operation Audio on Start clipping 30s forward Add customized 30s reverse Add default tag Pause reverse play/ Reverse play/ Tag management Speed down Single-frame...
  • Page 68 Figure 6. 10 Interface of Playback by Time Click button to add default tag. Click button to add customized tag and input tag name. Max. 64 tags can be added to a single video file. Tag management. Click button to check, edit and delete tag(s). Figure 6.
  • Page 69 Steps: Select the Tag from the drop-down list in the Playback interface. Choose channels, edit start time and end time, and then click Search to enter Search Result interface. You can enter keyword in the textbox to search the tag on your command. Figure 6.
  • Page 70 Figure 6. 13 Interface of Playback by Tag Figure 6. 14 Toolbar of Playback by Tag Table 6. 3 Detailed Explanation of Playback-by-tag Toolbar Button Operation Button Operation Button Operation Audio on Start clipping 30s forward Add customized 30s reverse Add default tag Pause reverse play/ Reverse play/...

  • Page 71: Smart Playback

    Previous day Next day Full Screen Exit Stop Digital Zoom Save the clips Process bar Video type Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate special frames. 6.1.5 Smart Playback Purpose: The smart playback function provides an easy way to get through the less effective information.
  • Page 72 Figure 6. 16 Smart Playback Interface Table 6. 4 Detailed Explanation of Smart Playback Button Operation Button Operation Button Operation Pause play / Smart search Stop Play Scaling Process bar up/down the Playback type time line Select a camera in the camera list and select a date in the calendar. 4.
  • Page 73 Figure 6. 17 Draw Area of Smart Search Set the rules and areas. Intrusion Detection Click the button, and then specify 4 points to set a quadrilateral region for intrusion detection. Only one region can be set. Motion Detection i. Click the to set the search area manually.

  • Page 74: Playing Back By System Logs

    Figure 6. 18 Smart Search Result Playback progress bar: use the mouse to click any point of the progress bar to locate specific frames. 6.1.6 Playing Back by System Logs Purpose: Play back record file(s) associated with channels after searching system logs. Steps: Enter Log Information interface.
  • Page 75 System Log Search Interface Choose a log with record file and click button to enter Playback interface. If there is no record file at the time point of the log, the message box “No result found” will pop up. Result of System Log Search Playback interface.

  • Page 76: Playing Back External File

    Interface of Playback by Log 6.1.7 Playing Back External File Purpose: Perform the following steps to look up and play back files in the external devices. Steps: Enter Tag Search interface. Menu>Playback>External File Figure 6. 19 Interface of External File Playback...

  • Page 77: Auxiliary Functions Of Playback

    6.2 Auxiliary Functions of Playback 6.2.1 Playing Back Frame by Frame Purpose: Play video files frame by frame, in case of checking image details of the video when abnormal events happen. Steps: • Using a Mouse: Go to Playback interface. If you choose playback of the record file: click button until the speed changes to Single frame and one click on the playback screen represents playback of one frame.

  • Page 78: Reverse Playback Of Multi-Channel

    Right-click the image to exit the digital zoom interface. 6.2.3 Reverse Playback of Multi-channel Purpose: You can play back record files of multi-channel reversely. Up to 16-ch (with 1280*720 resolution) simultaneous reverse playback is supported; up to 4-ch (with 1920*1080P resolution) simultaneous reverse playback is supported and up to 1-ch (with 2560*1920 resolution) reverse playback is supported.

  • Page 79: Chapter 7 Backup

    Chapter 7 Backup...

  • Page 80: Backing Up Record Files

    7.1 Backing up Record Files 7.1.1 Quick Export Purpose: Export record files to backup device(s) quickly. Steps: Enter Video Export interface. Menu>Export>Normal Choose the channel(s) you want to back up and click Quick Export button. The time duration of record files on a specified channel cannot exceed one day. Otherwise, the message box “Max.

  • Page 81: Backing Up By Normal Video Search

    Figure 7. 2 Quick Export using USB1-1 Stay in the Exporting interface until all record files are exported. 7.1.2 Backing up by Normal Video Search Purpose: The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB writer) and SATA writer.
  • Page 82 Figure 7. 3 Normal Video Search for Backup Select record files you want to back up. Click to play the record file if you want to check it. Check the checkbox before the record files you want to back up. The size of the currently selected files is displayed in the lower-left corner of the window.
  • Page 83 If the inserted USB device is not recognized: • Click the Refresh button. • Reconnect device. • Check for compatibility from vendor. You can also format USB flash drives or USB HDDs via the device. Figure 7. 5 Export by Normal Video Search using USB Flash Drive Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”.
  • Page 84 Figure 7. 6 Normal Video Search for Backup Select record files you want to back up. Click button to play the record file if you want to check it. Check the checkbox before the record files you want to back up. The size of the currently selected files is displayed in the lower-left corner of the window.

  • Page 85: Backing Up By Event Search

    • Click the Refresh button. • Reconnect device. • Check for compatibility from vendor. Figure 7. 8 Export by Normal Video Search using USB Writer Stay in the Exporting interface until all record files are exported with pop-up message box “Export finished”. 7.1.3 Backing up by Event Search Purpose: Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer) and SATA...
  • Page 86 Figure 7. 9 Event Search for Backup 2. Select record files to export. 1) Clicking Quick Export button will export record files of all channels triggered by the selected alarm input. Figure 7. 10 Result of Event Search 2) Click Details button to view detailed information of the record file, e.g. start time, end time, file size, etc.
  • Page 87 Figure 7. 11 Event Details Interface Export. Click Export All button to export all the recording files. Or you can select recording files you want to back up, and click Export button to enter Export interface. If the inserted USB device is not recognized: •...

  • Page 88: Backing Up Video Clips

    Check backup result. The Player player.exe will be exported automatically during record file export. 7.1.4 Backing up Video Clips Purpose: You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB HDDs, USB writer) or SATA writer. Steps: Enter Playback interface.
  • Page 89 If the inserted USB device is not recognized: • Click the Refresh button. • Reconnect device. • Check for compatibility from vendor. You can also format USB flash drive or USB HDDs via the device. Figure 7. 14 Export Video Clips Using USB Flash Drive Stay in the Exporting interface until all record files are exported with pop-up message “Export finished”.

  • Page 90: Managing Backup Devices

    7.2 Managing Backup Devices Management of USB flash drives and USB HDDs Steps: 1. Enter Search Result interface of record files. Menu>Export>Normal Set search condition and click Search button to enter Search Result interface. At least one channel shall be selected. Figure 7.
  • Page 91 Figure 7. 16 Result of Normal Video Search for Backup 3. Backup device management. Click New Folder button if you want to create a new folder in the backup device. Select a record file or folder in the backup device and click button if you want to delete it.
  • Page 92 Menu>Export>Normal Set search condition and click Search button to enter Search Result interface. At least one channel shall be selected. Figure 7. 18 Normal Video Search for Backup 2. Select record files you want to back up. Click Export All button to export all the recording files. Or you can select recording files you want to back up, and click Export button to enter Export interface.
  • Page 93 3. Backup device management. Click Erase button if you want to erase the files from a re-writable CD/DVD.  There must be a re-writable CD/DVD when you make this operation.  If the inserted USB writer or DVD-R/W is not recognized: •...

  • Page 94: Chapter 8 Alarm Settings

    Chapter 8 Alarm Settings...

  • Page 95: Setting Motion Detection Alarm

    8.1 Setting Motion Detection Alarm Steps: 1. Enter Motion Detection interface of Camera Management and choose a camera you want to set up motion detection. Menu> Camera> Motion Figure 8. 1 Motion Detection Setup Interface Set up detection area and sensitivity. Tick “Enable Motion Detection”, use the mouse to draw detection area(s) and drag the sensitivity bar to set sensitivity.
  • Page 96 1) Select Arming Schedule tab to set the arming schedule of handling actions for the motion detection. 2) Choose one day of a week and up to eight time periods can be set within each day. 3) Click Apply to save the settings Time periods shall not be repeated or overlapped.

  • Page 97: Setting Sensor Alarms

    8.2 Setting Sensor Alarms Purpose: Set the handling action of an external sensor alarm. Steps: Enter Alarm Settings of System Configuration and select an alarm input. Menu> Configuration> Alarm Select Alarm Input tab to enter Alarm Input Settings interface. Figure 8. 4 Alarm Status Interface of System Configuration Set up the handling action of the selected alarm input.
  • Page 98 Figure 8. 6 Set Arming Schedule of Alarm Input Choose one day of a week and Max. eight time periods can be set within each day, and click Apply to save the settings. Time periods shall not be repeated or overlapped. Repeat the above steps to set up arming schedule of other days of a week.
  • Page 99 Figure 8. 7 Set PTZ Linking of Alarm Input If you want to set handling action of another alarm input, repeat the above steps. Or you can click the Copy button on the Alarm Input Setup interface and check the checkbox of alarm inputs to copy the settings to them.

  • Page 100: Detecting Video Loss Alarm

    8.3 Detecting Video Loss Alarm Purpose: Detect video loss of a channel and take alarm response action(s). Steps: Enter Video Loss interface of Camera Management and select a channel you want to detect. Menu> Camera> Video Loss Figure 8. 9 Video Loss Setup Interface Set up handling action of video loss.
  • Page 101 Figure 8. 10 Set Arming Schedule of Video Loss 4. Select Linkage Action tab to set up alarm response action of video loss (please refer to Chapter Setting Alarm Response Actions). Click the OK button to complete the video loss settings of the channel.

  • Page 102: Detecting Video Tampering Alarm

    8.4 Detecting Video Tampering Alarm Purpose: Trigger alarm when the lens is covered and take alarm response action(s). Steps: 1. Enter Video Tampering interface of Camera Management and select a channel you want to detect video tampering. Menu> Camera> Video Tampering Figure 8.
  • Page 103 Figure 8. 12 Set Arming Schedule of Video Tampering 4. Select Linkage Action tab to set up alarm response actions of video tampering alarm (please refer to Chapter Setting Alarm Response Actions). Click the OK button to complete the video tampering settings of the channel.

  • Page 104: Detecting Vca Alarm

    8.5 Detecting VCA Alarm Purpose: The NVR can receive the VCA alarm sent by IP camera, and the VCA detection must be enabled and configured on the IP camera settings interface first. Refer to the user manual of IP camera for detailed instructions to set the VCA rules.
  • Page 105 Figure 8. 14 Set Arming Schedule of VCA Alarm Choose one day of a week and Max. eight time periods can be set within each day, and click Apply to save the settings. Time periods shall not be repeated or overlapped. Repeat the above steps to set up arming schedule of other days of a week.

  • Page 106: Handling Exceptions Alarm

    PoE Power Overload: The power consumption of the connected cameras via the PoE interface exceeds the maximum PoE power. PoE Power Overload is only supported by DSC-N114-8P and DSC-N114-16P NVR. Steps: Enter Exception interface of System Configuration and handle various exceptions.

  • Page 107: Setting Alarm Response Actions

    8.7 Setting Alarm Response Actions Purpose: Alarm response actions will be activated when an alarm or exception occurs, including Event Hint Display, Full Screen Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Upload Picture to FTP, Trigger Alarm Output and Send Email. Event Hint Display When an event or exception happens, a hint can be displayed on the lower-left corner of live view image.
  • Page 108 If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval of 10 seconds (default dwell time). A different dwell time can be set by going to Menu >Configuration>Live View > Full Screen Monitoring Dwell Time. Auto-switch will terminate once the alarm stops and you will be taken back to the Live View interface.
  • Page 109 Time periods shall not be repeated or overlapped. Figure 8. 19 Set Arming Schedule of Alarm Output 3. Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to copy an arming schedule to other days.

  • Page 110: Triggering Or Clearing Alarm Output Manually

    8.8 Triggering or Clearing Alarm Output Manually Purpose: Sensor alarm can be triggered or cleared manually. If “Manually Clear” is selected in the dropdown list of dwell time of an alarm output, the alarm can be cleared only by clicking Clear button in the following interface. Steps: Select the alarm output you want to trigger or clear and make related operations.

  • Page 111: Chapter 9 Network Settings

    Chapter 9 Network Settings...

  • Page 112: Configuring General Settings

    9.1 Configuring General Settings Purpose: Network settings must be properly configured before you operate NVR over network. Steps: Enter the Network Settings interface. Menu >Configuration>Network Select the General tab. Figure 9. 1 Network Settings Interface 3. In the General Settings interface, you can configure the following settings: Working Mode, NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server.

  • Page 113: Configuring Advanced Settings

    9.2 Configuring Advanced Settings 9.2.1 Configuring PPPoE Settings Purpose: Your NVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE). Steps: 1. Enter the Network Settings interface. Menu >Configuration> Network 2. Select the PPPoE tab to enter the PPPoE Settings interface, as shown in Figure 9. 22. Figure 9.
  • Page 114 Figure 9. 3 DDNS Settings Interface 3. Check the DDNS checkbox to enable this feature. Select DDNS Type. Five different DDNS types are selectable: DynDNS, PeanutHull, NO-IP • DynDNS: 1) Enter Server Address for DynDNS (i.e. members.dyndns.org). 2) In the NVR Domain Name text field, enter the domain obtained from the DynDNS website. 3) Enter the User Name and Password registered in the DynDNS website.

  • Page 115: Configuring Ntp Server

    Figure 9. 6 NO-IP Settings Interface 9.2.3 Configuring NTP Server Purpose: Ensure the network connection of the PC (running FTP server) and the device is valid and correct. Run the FTP server on the PC and copy the firmware into the corresponding directory of your PC. Refer to the user manual of the FTP server to set the FTP server on your PC and put the firmware file into the directory as required.

  • Page 116: Configuring Snmp

    function, such as the server at the National Time Center (IP Address: 210.72.145.44). If the NVR is setup in a more customized network, NTP software can be used to establish a NTP server used for time synchronization. 9.2.4 Configuring SNMP Purpose: You can use SNMP protocol to get device status and parameters related information.

  • Page 117: Configuring Multicast

    Figure 9. 9 More Settings Interface 3. Enter Alarm Host IP and Alarm Host Port in the text fields. The Alarm Host IP refers to the IP address of the remote PC on which the Network Video Surveillance Software is installed, and the Alarm Host Port must be the same as the alarm monitoring port configured in the software.

  • Page 118: Configuring Server And Http Ports

    The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in communication systems to control streaming media servers. Steps: Enter the Network Settings menu Menu >Configuration> Network Select the More Settings tab to enter the More Settings menu, as shown in Figure 9. 9. Figure 9.
  • Page 119 etc., an alarm or motion event is detected or the administrator password is changed. Before configuring the Email settings, the NVR must be connected to a local area network (LAN) that maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the location of the e-mail accounts to which you want to send notification.

  • Page 120: Configuring Nat

    SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com). SMTP Port No.: The SMTP port. The default TCP/IP port used for SMTP is 25. Enable SSL (optional): Click the checkbox to enable SSL if required by the SMTP server. Sender: The name of sender.
  • Page 121 Figure 9. 15 UPnP™ Settings Interface checkbox to enable UPnP™. 3. Check 4. Select the Mapping Type as Manual or Auto in the drop-down list. OPTION 1: Auto If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router automatically.
  • Page 122 other ports should be between 1 and 65535 and the value must be different from each other. If multiple devices are configured for the UPnP™ settings under the same router, the value of the port No. for each device should be unique. Figure 9.

  • Page 123: Checking Network Traffic

    The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of the other ports should be between 1 and 65535 and the value must be different from each other. If multiple devices are configured for the UPnP™ settings under the same router, the value of the port No. for each device should be unique.
  • Page 124 Figure 9. 21 Network Traffic Interface 2. You can view the sending rate and receiving rate information on the interface. The traffic data is refreshed every 1 second.

  • Page 125: Configuring Network Detection

    9.4 Configuring Network Detection Purpose: You can obtain network connecting status of NVR through the network detection function, including network delay, packet loss, etc. 9.4.1 Testing Network Delay and Packet Loss Steps: 1. Enter the Network Traffic interface. Menu >Maintenance>Net Detect 2.

  • Page 126: Checking The Network Status

    Click the Network Detection tab to enter the Network Detection interface. Select the backup device from the dropdown list of Device Name, as shown in Figure 9. 24. Click Refresh button if the connected local backup device cannot be displayed. When it fails to detect the backup device, please check whether it is compatible with the NVR.

  • Page 127: Checking Network Statistics

    Figure 9. 26 Network status checking result If the message box pops out with other information instead of this one, you can click Network button to show the quick setting interface of the network parameters. 9.4.4 Checking Network Statistics Purpose: You can check the network status to obtain the real-time information of NVR.

  • Page 128: Chapter 10 Hdd Management

    Chapter 10 HDD Management...

  • Page 129: Initializing Hdds

    10.1 Initializing HDDs Purpose: A newly installed hard disk drive (HDD) must be initialized before it can be used with your NVR. Steps: 1. Enter the HDD Information interface. Menu > HDD> General Figure 10. 1 HDD Information Interface 2. Select HDD to be initialized. 3.

  • Page 130: Managing Network Hdd

    10.2 Managing Network HDD Purpose: You can add the allocated NAS or disk of IP SAN to NVR, and use it as network HDD. Steps: Enter the HDD Information interface. Menu > HDD>General Figure 10. 4 HDD Information Interface Click the Add button to enter the Add NetHDD interface, as shown in Figure 10. 5. Figure 10.
  • Page 131 Up to 8 NAS disks can be added. • Add IP SAN: 1) Enter the NetHDD IP address in the text field. 2) Click the Search button to search the available IP SAN disks. 3) Select the IP SAN disk from the list shown below. 4) Click the OK button to add the selected IP SAN disk.

  • Page 132: Managing Hdd Group

    10.3 Managing HDD Group 10.3.1 Setting HDD Groups Purpose: Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD group through HDD settings. Steps: Enter the Storage Mode interface. Menu > HDD > Advanced Set the Mode to Group, as shown in Figure 10.

  • Page 133: Setting Hdd Property

    Figure 10. 8 Local HDD Settings Interface Select the Group number for the current HDD. The default group No. for each HDD is 1. Click the OK button to confirm the settings. In the pop-up attention box, click the Yes button to finish the settings. 10.3.2 Setting HDD Property Purpose: The HDD property can be set to redundancy, read-only or read/write (R/W).
  • Page 134 Figure 10. 9 Set HDD Property 3. Set the HDD property to R/W, Read-only or Redundancy. 4. Click the OK button to save the settings and exit the interface. 5. In the HDD Information menu, the HDD property will be displayed in the list. At least 2 hard disks must be installed on your NVR when you want to set a HDD to Redundancy, and there is one HDD with R/W property.

  • Page 135: Configuring Quota Mode

    10.4 Configuring Quota Mode Purpose: Each camera can be configured with allocated quota for the storage of recorded files. Steps: Enter the Storage Mode interface. Menu > HDD > Advanced Set the Mode to Quota, as shown in Figure 10. 10. The NVR must be rebooted to enable the changes to take effect.
  • Page 136 Figure 10. 12 Copy Settings to Other Camera(s) 6. Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of IP Camera to select all cameras. Click the OK button to finish the Copy settings and back to the Storage Mode interface. Click the Apply button to apply the settings.

  • Page 137: Checking Hdd Status

    10.5 Checking HDD Status Purpose: You may check the status of the installed HDDs on NVR so as to take immediate check and maintenance in case of HDD failure. Checking HDD Status in HDD Information Interface Steps: Enter the HDD Information interface. Menu >...

  • Page 139: Hdd Detection

    10.6 HDD Detection Purpose: The device provides the HDD detection function such as the adopting of the S.M.A.R.T. and the Bad Sector Detection technique. The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to detect and report on various indicators of reliability in the hopes of anticipating failures. S.M.A.R.T.
  • Page 140 1. Click the Bad Sector Detection tab. 2. Select the HDD No. in the dropdown list you want to configure, and choose All Detection or Key Area Detection as the detection type. 3. Click the Detect button to start the detection. Figure 10.

  • Page 141: Configuring Hdd Error Alarms

    10.7 Configuring HDD Error Alarms Purpose: You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal. Steps: Enter the Exception interface. Menu > Configuration > Exceptions Select the Exception Type to HDD Error from the dropdown list. Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 10.

  • Page 142: Chapter 11 Camera Settings

    Chapter 11 Camera Settings...

  • Page 143: Configuring Osd Settings

    11.1 Configuring OSD Settings Purpose: You can configure the OSD (On-screen Display) settings for the camera, including date /time, camera name, etc. Steps: Enter the OSD Configuration interface. Menu > Camera > OSD Select the camera to configure OSD settings. Edit the Camera Name in the text field.

  • Page 144: Configuring Privacy Mask

    11.2 Configuring Privacy Mask Purpose: You are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator. The privacy mask can prevent certain surveillance areas to be viewed or recorded. Steps: Enter the Privacy Mask Settings interface. Menu >...
  • Page 145 Figure 11. 3 Set Privacy Mask Area Click the Apply button to save the settings.

  • Page 146: Configuring Video Parameters

    11.3 Configuring Video Parameters Steps: Enter the Image Settings interface. Menu > Camera >Image Figure 11. 4 Image Settings Interface Select the camera to set image parameters. You can click on the arrow to change the value of each parameter. Click the Apply button to save the settings.

  • Page 147: Chapter 12 Nvr Management And Maintenance

    Chapter 12 NVR Management Maintenance...

  • Page 148: Viewing System Information

    12.1 Viewing System Information 12.1.1 Viewing Device Information Steps: Enter the System Information interface. Menu >Maintenance>System Info 2. Click the Device Info tab to enter the Device Information menu to view the device name, model, serial No. , firmware version and encode version, as shown in Figure 12. 1. Figure 12.

  • Page 149: Viewing Alarm Information

    each camera, as shown in Figure 12. 3. Figure 12. 3 Record Information Interface 12.1.4 Viewing Alarm Information Steps: 1. Enter the System Information interface. Menu >Maintenance>System Info 2. Click the Alarm tab to enter the Alarm Information menu to view the alarm information, as shown in Figure 12.

  • Page 150: Viewing Hdd Information

    Figure 12. 5 Network Information Interface 12.1.6 Viewing HDD Information Steps: Enter the System Information interface. Menu > Maintenance > System Info 2. Click the HDD tab to enter the HDD Information menu to view the HDD status, free space, property, etc., as shown in Figure 12.

  • Page 151: Searching & Export Log Files

    12.2 Searching & Export Log Files Purpose: The operation, alarm, exception and information of the NVR can be stored in log files, which can be viewed and exported at any time. Steps: 1. Enter the Log Search interface. Menu > Maintenance > Log Information Figure 12.
  • Page 152 Figure 12. 8 Log Search Results Up to 2000 log files can be displayed each time. 5. You can click the button of each log or double click it to view its detailed information, as shown in Figure 12. 9. And you can also click the button to view the related video files if available.
  • Page 153 Figure 12. 10 Export Log Files 7. Select the backup device from the dropdown list of Device Name. 8. Click the Export to export the log files to the selected backup device. You can click the New Folder button to create new folder in the backup device, or click the Format button to format the backup device before log export.

  • Page 154: Importing/Exporting Ip Camera Info

    12.3 Importing/Exporting IP Camera Info Purpose: The information of added IP camera can be generated into an excel file and exported to the local device for backup, including the IP address, manage port, password of admin, etc.. And the exported file can be edited on your PC, like adding or deleting the content, and copy the setting to other devices by importing the excel file to it.

  • Page 155: Importing/Exporting Configuration Files

    12.4 Importing/Exporting Configuration Files Purpose: The configuration files of the NVR can be exported to local device for backup; and the configuration files of one NVR can be imported to multiple NVR devices if they are to be configured with the same parameters. Steps: Enter the Import/Export Configuration File interface.

  • Page 156: Upgrading System

    12.5 Upgrading System Purpose: The firmware on your NVR can be upgraded by local backup device or remote FTP server. 12.5.1 Upgrading by Local Backup Device Steps: Connect your NVR with a local backup device where the update firmware file is located. Enter the Upgrade interface.
  • Page 157 Refer to the user manual of the FTP server to set the FTP server on your PC and put the firmware file into the directory as required. Steps: 1. Enter the Upgrade interface. Menu >Maintenance>Upgrade 2. Click the FTP tab to enter the local upgrade interface, as shown in Figure 12. 14. Figure 12.

  • Page 158: Restoring Default Settings

    12.6 Restoring Default Settings Steps: 1. Enter the Default interface. Menu > Maintenance > Default Figure 12. 15 Restore Factory Default 2. Click the OK button to restore the default settings. Except the network parameters (including IP address, subnet mask, gateway, MTU, NIC working mode, default route and server port), all other parameters of the device will be restored to factory default settings.

  • Page 159: Chapter 13 Others

    Chapter 13 Others...

  • Page 160: Configuring Rs-232 Serial Port

    13.1 Configuring RS-232 Serial Port Purpose: The RS-232 port can be used in two ways: • Parameters Configuration: Connect a PC to the NVR through the PC serial port. Device parameters can be configured by using software such as HyperTerminal. The serial port parameters must be the same as the NVR’s when connecting with the PC serial port.

  • Page 161: Configuring General Settings

    13.2 Configuring General Settings Purpose: You can configure the BNC output standard, VGA output resolution, mouse pointer speed through the Menu > Configuration > General interface. Steps: 1. Enter the General Settings interface. Menu >Configuration> General 2. Select the General tab. Figure 13.

  • Page 162: Configuring Dst Settings

    13.3 Configuring DST Settings Steps: Enter the General Settings interface. Menu >Configuration>General Choose DST Settings tab. Figure 13. 3 DST Settings Interface You can check the checkbox before the Auto DST Adjustment item. Or you can manually check the Enable DST checkbox, and then you choose the date of the DST period.

  • Page 163: Configuring More Settings For Device Parameters

    13.4 Configuring More Settings for Device Parameters Steps: Enter the General Settings interface. Menu >Configuration>General Click the More Settings tab to enter the More Settings interface, as shown in Figure 13. 4 Figure 13. 4 More Settings Interface Configure the following settings: •...

  • Page 164: Managing User Accounts

    13.5 Managing User Accounts Purpose: There is a default account in the NVR: Administrator. The Administrator user name is admin and the password is 12345. The Administrator has the permission to add and delete user and configure user parameters. 13.5.1 Adding a User Steps: Enter the User Management interface.
  • Page 165 • Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the local/remote playback in the Camera Configuration by default. User’s MAC Address: The MAC address of the remote PC which logs onto the NVR. If it is configured and enabled, it only allows the remote user with this MAC address to access the NVR.

  • Page 166: Deleting A User

    • Remote Camera Management: Remote adding, deleting and editing of the IP cameras. • Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports. • Remote Video Output Control: Sending remote button control signal. • Two-Way Audio: Realizing two-way radio between the remote client and the NVR. •...
  • Page 167 Enter the User Management interface. Menu >Configuration>User Select the user to be edited from the list, as shown in Figure 13. 9. Click the icon to enter the Edit User interface, as shown in Figure 13. 10. The admin user can also be edited. Operator and Guest Admin Figure 13.
  • Page 168 the text field of Password and Confirm. • Admin You are only allowed to edit password and MAC address. Check the checkbox of Change Password if you want to change the password, and the input the correct old password, and the new one in the text field of Password and Confirm.

  • Page 169: Chapter 14 Appendix

    Chapter 14 Appendix...

  • Page 170: Glossary

    Glossary • Dual Stream: Dual stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the DVR, with the main stream having a maximum resolution of 4CIF and the sub-stream having a maximum resolution of CIF. •...

  • Page 171: Troubleshooting

    Troubleshooting  No image displayed on the monitor after starting up normally. Possible Reasons No VGA or HDMI connections. Connection cable is damaged. Input mode of the monitor is incorrect. Steps 1. Verify the device is connected with the monitor via HDMI or VGA cable.
  • Page 172 If not, please contact the engineer from our company to do the further process.  The status of the added IP camera displays as “Disconnected” when it is connected through Private Protocol. Select “Menu>Camera>Camera>IP Camera” to get the camera status. Possible Reasons Network failure, and the NVR and IP camera lost connections.
  • Page 173 1) When the IP camera is offline, connect PC and NVR with the RS-232 cable. 2) Open the Super Terminal, use the ping command and keep sending large data packages to the connected IP camera, and check if there exists packet loss. Simultaneously press Ctrl and C to exit the ping command.
  • Page 174 Simultaneously press Ctrl and C to exit the ping command. 2. Verify the frame rate is real-time frame rate. Select “Menu > Record > Parameters > Record”, and set the Frame rate to Full Frame. 3. Check if the fault is solved by the above steps. If it is solved, finish the process.
  • Page 175 Windows task management interface Select the “Performance” tab; check the status of the CPU and Memory. If the resource is not enough, please end some unnecessary processes. 4. Check if the fault is solved by the above steps. If it is solved, finish the process. If not, please contact the engineer from our company to do the further process.
  • Page 176 Possible Reasons: a) Poor network between NVR and IP camera, and there exists packet loss during the transmission. b) The frame rate is not the real-time frame rate. c) The NVR supports up to 16-channel synchronize playback at the resolution of 4CIF, if you want a 16-channel synchronize playback at the resolution of 720p, the frame extracting may occur, which leads to a slight stuck.

  • Page 177: List Of Compatible Ip Cameras

    List of Compatible IP Cameras  For the list, our company holds right to interpret.  ONVIF compatibility refers to the camera can be supported both when it uses the ONVIF protocol and its private protocols. Only ONVIF is supported refers to the camera can only be supported when it uses the ONVIF protocol.
  • Page 178 IP Camera Max. Manufacturer or Model Version Sub-stream Audio Resolution Protocol √ CB-500Ap (ONVIF compatibility) V3.2.1.3 1920× 1080 × √ WFB-100Ap V3.1.0.9 1280× 800 × √ VB-M400 Ver.+1.0.0 1280× 960 × Canon VB-M6000D Ver.+1.0.0 1280× 960 × × √ VB-M7000F Ver.+1.0.0 1280×...
  • Page 179 IP Camera Max. Manufacturer or Model Version Sub-stream Audio Resolution Protocol 2.9080-A1.7852 SAMSUNG √(Only ONVIF √ SNB-5080P V3.10_130416 1280× 1024 (ONVIF is supported) compatibility) × × VCC-HD2300P 2.03-02(110318-00) 1920× 1080 √ SANYO × VCC-HD2500P 2.02-02(110208-00) 1920× 1080 √ × VCC-HD4600P 2.03-02(110315-00) 1920×...

Table of Contents