Setting The Security Code; Basic Operation - Emerson EM1250 Owner's Manual

SETTING THE SECURITY CODE

To access this unit from an outside phone you will need to enter a 3 digit code.
The default security code of this unit is (000). To change the security code, press
and hold down the
the PLAY/STOP button to confirm. Repeat until you have set all three digit. To
check your security code press and quickly release the
NOTE: During idle status, press and quickly release the
machine system will announce the time and day setting, or press and quickly
release the button to hear the remote control code. To reset the unit to the
factory default settings, press and hold down the
and the LED displays F.

BASIC OPERATION

Setting Answer On or Off
The answering system is on by default.
Press the button to turn the answering
system off. Press the
to turn the answering system back on.
BASIC OPERATION
button at idle status. Use the
previous
button once again
or
button.
previous
button, the answering
next
button until you hear a beep
Setting Answer On or Off
use the electronic volume control to set
the sound level. Press the or down
buttons to adjust the volume to the
desired level.
buttons to adjust, and