Name And Call Tone Tagging - Motorola CDM1250 User Manual

The display shows the current power level.
y
6
or until
7 Press the Menu/Enter button to confirm the
selection.

NAME AND CALL TONE TAGGING

You can program your radio to sound a
particular alert tone when:
• a specific user is calling—name tone
tagging, or
• your radio is receiving a type of radio call—
call tone tagging.
There are seven alert tones to select from.
Note: The enhanced keypad microphone is
To tag a specific user's name or ID:
1 Press the Menu/Enter button to enter Menu
Mode.
26
English
z
or until
Power High?
Power Low?
required to operate this feature.
y z
2 or until
3 Press the Menu/Enter
button to select
y z
4 or until
5 Press the Menu/Enter
button to select
y z
6 or until you see the name or call you
want to tag.
7 Press the Menu/Enter button to confirm the
selection.
y z
8 or until you hear one of the seven
tones you want to use for this name or call.
9 Press the Menu/Enter button to confirm the
selection.
You will see
10 Press the Exit button
to return to
–or–
Hold down the Exit button to exit Menu Mode.
Audio/Tones
Audio/Tones
Name Tone Tag
Name Tone Tag
Name Tag Set
Name Tone Tag