Copier; Inserting Documents; Making A Copy; Adjusting Copies - Philips LaserFax LPF 920 User Manual

6 Copier

Inserting Documents

Document Formats
Use documents with size A4 · 210¦×¦297 millimetres
2
with 60¦–¦90¦g/m . Do not use any documents that are
smaller than A4. You can insert up to 20 documents at a
time.
1 Insert the documents face down into the document
feeder. The lower most document will be fed in first.
You can insert up to 20 documents at a time.
2 Push the document guide inwards, so that it lies level
on the documents.
Press j to eject the documents without copying
them.
3 Set the desired resolution. You can choose between h/
FINE (for documents without special features), f/
SFINE (for documents with many details) and x/
PHOTO (for the highest resolution). Press fx. The
symbol of the selected resolution appears in the display.
With function 16, you can select the default res-
olution setting (also see chapter Set Resolution,
page 27).

Making a Copy

Press COPY twice. The copy is created.

Adjusting Copies

1 Press COPY.
2 Enter the number of times you would like to copy the
document (maximum of 99 copies).
3 Confirm with OK.
Copier
4 Select the desired resolution using [. You have a
higher resolution available to you for copying than you
have for fax transmissions.
RESOL.:FAST —For documents without special fea-
tures
RESOL.:QUALITY —For documents with small print
or drawings
RESOL.:PHOTO —For the highest resolution
5 Confirm with OK.
6 You can make copies of the document that are enlarged
or that are compressed in size. Size compression is pos-
sible down to 25 percent of the size of the original, and
enlargements of up to 400 percent can be made. Enter
the the desired value using the numeric keypad.
7 Confirm with OK.
8 Using [, select the desired contrast.
9 Confirm with OK. The copy is created.
EN
17