Deferred Polling
If Polling is requested with a deferred time, it will start Polling at the pre-programmed time.
Up to 50 built-in timers can be set for deferred communication.
For instructions on how to use polling without a pre-programmed time, refer to Polling (see page 54).
1
Press the Fax key.
2
Select "More Menus".
3
Select "Polling" in "Deferred Comm."
52
Pre-programmed
Receiver
Communication Time
Request to Poll
Document(s)
4
Sender
Memory
Enter a communication time, and then
select "OK".
Enter the time in a 24-hour format.
Ex: 18: 00
If you make a mistake, select "Clear" to
delete entries one digit at a time.