Using The Address Book - Panasonic WORKIO DP-C262 Facsimile Manual

Using the Address Book

Use a Key Name
If a destination is registered in the address
book, it can be selected by using a Key Name.
The fax numbers must be pre-programmed into
the address book. Refer to Adding a Fax Number
into the Address Book (see page 165).
1
Follow the step 1 and 2 on page 14.
2
Select the Key Name tab.
3
Select the desired destination.
To cancel the choice, select the same
destination again.
To enter additional destinations, repeat
Steps 2 and 3.
Select "Destinations:###" to confirm your
designated destinations.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts dialing the telephone
number.
18
Search through the "Favorites"
If a destination is registered as a Favorite in the
address book, it can be selected using the
"Favorites" tab.
The fax numbers must be pre-programmed into
the address book. Refer to Adding a Fax Number
into the Address Book (see page 165).
1
Follow the step 1 and 2 on page 14.
2
Select "Favorites" to display the
Favorites screen.
3
Select the desired destination.
To cancel the choice, select the same
destination again.
For transmission to additional destinations,
continue pressing the relevant keys.
Select "Destinations:###" to confirm your
designated destinations.
4
Press the Start key.
The original(s) are stored into memory with a
file number. Then starts dialing the telephone
number.