Instructions On Adjusting And Testing - Audiovox FPE2005 Service Manual

Hide thumbs Also See for FPE2005:

Operating instructions manual (44 pages)

Table Of Contents

Table of Contents

breakage of screen glass or damage to driving circuit. Therefore it must be packed in a strong case

before the transportation or handling.

2.12. For the storage make sure to put it in a place where the environment can be controlled so as

to prevent the temperature and humidity from exceeding the limits as specified in the manual. For

prolonged storage, it is necessary to house it in an anti-moisture bag and put them altogether in one

place. The ambient conditions are tabulated as follows:

Temperature Scope for operation

humidity

2.13. Display of a fixed picture for a long time may result in appearance of picture residue on the

screen, as commmonly called "ghost shadow". The extent of the residual picture varies with the maker of

LCD screen. This phenonmenon doesn't represent failure. This "ghost shadow" may remain in the

picture for a period of time (several minutes).But when operating it please avoid displaying still picture in

high brightness for a long time.

3.Points for attention during installation

3.1. The front panel of LCD screen is of glass. Wheng installing it please make sure to put it in place.

3.2. For service or instatallation it's necessary to use specified screw lest it should damage the

screen.

3.3. Be sure to take anti dust measures. Any foreign substance that happens to fall down between

the screen and the glass will affect the receiving and viewing effect

3.4. When dismantling or mounting the protective partition plate that is used for anti vibration and

insulation please take care to keep it in intactness so as to avoid hidden trouble.

3.5. Be sure to protect the cabinet from damage or scratch during service, dismantling or mounting.