Install Your Modem Router - NETGEAR Nighthawk C6900 Quick Start Manual

LED
WiFi On/Off
button with LED
WPS button with
LED

Install Your Modem Router

¾ To install your modem router:
1. Collect your cable Internet provider information.
Collect your cable account number, account phone number,
and login information (your email address or user name and
password).
2. Turn off existing modems and routers.
If you are replacing a modem that is currently connected in your
home, unplug the modem and plug the new modem router into
the same outlet.
3. Connect a coaxial cable.
Use a coaxial cable that is provided by your cable company to
connect the cable port on the modem router to a cable wall
outlet or a line splitter.
Note: For XFINITY cable Internet service, Comcast XFINITY
recommends connecting your modem router directly to a cable wall
outlet.
Description
Pressing this button for two seconds turns the WiFi radios
in the modem router on and off. If this LED is lit, the WiFi
radios are on. If this LED is off, the WiFi radios are turned off
and you cannot use WiFi to connect to the modem router.
This button lets you use WPS to join the WiFi network
without typing the WiFi password. The WPS LED blinks
during this process and then lights solid.
4