Table of Contents
Advertisement
T e c h n o l o g y , L L C
INSTALLATION INSTRUCTIONS - DIVERTER CAP
Diverter Cap Installation
If a single fuel filter system is approved by the engine
manufacturer, the following steps are to be taken to install a
diverter cap properly .
1 . Select the required secondary filter head diverter cap
from those listed in Table 1 . The required diverter cap is
determined by the size of the spin-on filter stud and the
filter sealing surface diameter .
2 . Drain and remove the secondary fuel filter element .
3 . Lightly lubricate the seal on the top of the diverter cap
with clean engine oil .
4 . Thread the adapter onto the secondary filter stud and
tighten .
5 . Install the "Do Not Remove" label on the diverter cap .
DAVCO Technology, LLC
P. O. Box 487
Saline, MI 48176
TECHNICAL MANUAL
Diverter Cap
Required
Part Number
Filter Head
Stud Size
101480
1"-14
101589
1"-14
101570
M16 x 1 .5
101466
3/4"-16
101492
7/8" x 14
Call 800-328-2611
6
FUEL PRO
®
Required
Required
Filter Head
Filter Head
Seal ID
Seal OD
2 .475"
2 .895"
3 .225"
3 .435"
2 .475"
2 .895"
2 .475"
2 .895"
2 .475"
2 .895"
Table 1
www.davco.com
F1271 REV J
October 3, 2016 11:34 AM
382
Hide quick links:
Advertisement
Table of Contents
