Sony HXR-NX5U User Manual page 18

1) Press the MODE button
2) (on the LCD screen) Touch [EDIT] –>[PHOTO CAPTURE] –> select the desired memory card and
image quality.
3) Touch the movie to be captured. The selected movie starts playback
4) Touch the play/pause button at the point where you want to capture. The movie pauses. Play
and pause toggles as you press the play/pause button. (you can make fine adjustments using the
rewind, fast forward buttons
5) Touch OK
The captured still image is saved on the memory card selected for movies. When capturing is
finished, the screen returns to pause. You can continue to capture still images by press play again
and repeat steps 4.
ADVANCED FEATURES AVAILABLE:
1) MENU button
2) DISPLAY SET with the SEL/PUSH EXEC Dial
3) Select one of the following:
Zebra: You can display a zebra pattern as a guide for adjusting brightness.
You can use the zebra pattern to identify areas that might be overexposed, so you can correct the
exposure appropriately. The camcorder offers two levels of zebra pattern. The symbol is a zebra
pattern with a 100 for 100% or a 70 for 70%. The 100% shows only areas that will lose detail and
will be identified by the highlighted areas. On 70% zebra the highlighted areas will also identify
areas that are dangerously close to losing detail. More about Zebra Patterns Here
• ON/OFF : when you select ON the Zebra strip icon and the brightness level appear on the
screen. The zebra pattern will not be recorded with the image. The default setting is OFF.
• LEVEL: You can select the brightness level between 70 and 100 and 100+. The default settings
is 70.
* You can assign an ASSIGN button to work as [ON/OFF]
file:///Users/johannalc40/Documents/guide%20to%20the%20nx5u.html[10/25/12 2:40:02 PM]