Replacing The Cutting Unit - Norelco T960 User Manual

C
4
Clean the cutting unit and the inside of the
Trimmer with the brush supplied.
C
5 Close the cutting unit by pushing it back
into place on the Trimmer until you hear
a click.

Replacing The Cutting Unit

If your cutters become damaged or worn,
do not continue using the Trimmer.
Replace cutters immediately.
1
Open the cutting unit.
C
2 Remove the old cutting unit by pulling
it upwards.
C
3 Place the two notches of the new cutting
unit into the guiding slots.
4
Push the cutting unit back onto the
Trimmer until you hear a click.
This Trimmer has no other user-serviceable
parts. Any other service should be performed
by an Authorized Norelco Service Location.
ENGLISH 13