Inserting The First Cartridge; Replacing Cartridges - Norelco 6705X User Manual

INSERTING THE FIRST CARTRIDGE

1 Take one lotion or gel cartridge.Take the connector
supplied and remove it from the little bag. Push it into
the plastic cap of cartridge until it locks into position
with a click.
2 Push the release slide on the back of razor downwards
and open the cover of the cartridge compartment.
3 Slide the cartridge with the connector in place into the
razor. It only fits properly if the white side of the
connector is pointing upwards. Close the cover.
4 Press the applicator button a few times until the Nivea
for Men shaving lotion or gel appears.The razor is now
ready for use.

REPLACING CARTRIDGES

1 Open back cover of razor.
2 Remove empty cartridge, pull out and save the
connector. DO NOT discard the connector.
3 Rinse out cartridge compartment with water before
replacing cartridge. Air dry thoroughly.
ENGLISH 9.