Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Asus VT168N Series
Summary of Contents for Asus VT168N Series
- Page 1 VT168N Series LCD Monitor User Guide...
-
Page 2: Table Of Contents
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. -
Page 3: Notices
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. ® As an Energy Star Partner, our company has determined ® that this product meets the Energy Star guidelines for energy efficiency. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. -
Page 4: Safety Information
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. • Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided. • The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. • Use the appropriate power plug which complies with your local power standard. • Do not overload power strips and extention cords. Overloading can result in fire or electric shock. • Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface. • Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges. • Never push objects or spill liquid of any kind into the slots on the monitor cabinet. -
Page 5: Care & Cleaning
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner. • Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. The following symptoms are normal with the monitor: • The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours. • When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself! Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. - Page 6 Where to find more information Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
-
Page 7: Welcome
Welcome! ® Thank you for purchasing the ASUS VT168 Series LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the VT168 Series brings you! Package contents Check your VT168 Series LCD package for the following items: LCD monitor Monitor base Quick start guide 1 x Power cord 1 x VGA cable 1 x DVI-HDMI cable (optional) 1 x Micro-USB cable 1 x Warranty card If any of the above items is damaged or missing, contact your retailer immediately. ASUS LCD Monitor VT168N... -
Page 8: Assembling The Monitor Base
Assembling the monitor base To assemble the monitor base: Connect the base with the arm of monitor and turn clockwise. A click indicates that the base has been connected successfully. Adjust the monitor to the angle that is most comfortable for you. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. Connecting cables To connect cables: Connect the cables you need based on chapter 1.5.2, page1-5. Chapter 1: Product Introduction... -
Page 9: Monitor Introduction
Monitor introduction 1.5.1 Front of the LCD monitor Auto Shortcut key: • This is a Shortcut key. The default setting is Blue Light Filter. Auto Button: • Auto Adjust.: Automatically adjust the image to its optimized position, clock, and phase. Close Button: • Exit the OSD menu. MENU Button: • Press this button to enter the OSD menu. Power Button: • Press this button to turn the monitor on/off. Power Indicator: • The color definition of the power indicator is as the table below. Status Description White Amber Standby mode ASUS LCD Monitor VT168N... -
Page 10: Rear Of The Lcd Monitor
1.5.2 Rear of the LCD monitor AC-IN port DVI port VGA port Micro-USB port (only for touch function) Kensington Lock Screw holes for VESA Wall Mount Control buttons Chapter 1: Product Introduction... -
Page 11: Detaching The Base/Stand (For Vesa Wall Mount)
Detaching the base/stand (for VESA wall mount) The detachable stand of the LCD monitor is specially designed for VESA wall mount. To detach the arm/stand: Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table. Use your finger to loosen the screw located at the bottom of the base, and remove the base from the stand. And then remove the hinge cover from monitor body by using your fingers. Use a screwdriver to remove the four screws on the arm, and then detach the arm/stand from the monitor. • W e recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • H old the stand of the monitor while removing the screws. • The VESA wall mount kit ( 75 x 75 mm) is purchased separately. • Use only the UL Listed Wall Mount Bracket with minimum weight/ load 4.8kg according to the model listed in the specification table (Screw size: M4 x 10 mm). ASUS LCD Monitor VT168N... -
Page 12: Adjusting The Monitor
Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling while changing its angle. • You can adjust the monitor’s angle from -5˚ to 30˚. • Do not touch the Touch screen when you change the angle. It may cause damage or break the Touch screen and LCD screen. -5 ~ 30 Chapter 2: Setup... -
Page 13: Touch Operation
Touch Operation • ASUS VT168 is a touch monitor which uses 10 point touch panel technology. Please use with latest OS like Windows 10. • You can use either single finger touch, or multi-finger touch up to maximum simultaneous 10 touch points. 10-Point Touch • To activate touch functionality, you need to connect the display with the provided Micro-USB cable to your computer. • You do not need to install any other software. • ASUS VT168 offers you groovy touch gestures like tap, grab, pinch, rotate, zoom, swipe, etc. The gestures allow you to launch programs and access the setting of your ASUS VT168 Display. The functions can be activated by using the hand gestures to ASUS VT168. ASUS LCD Monitor VT168N... - Page 14 Left edge swipe (on Windows 7/8/8.1/10 only) Swipe from the left edge of the screen to shuffle your running apps. Right edge swipe (on Windows 7/8/8.1/10 only) Swipe from the right edge of the screen to launch the Charm bar. Finger slide (on Windows 7/8/8.1/10 only) Slide your finger to scroll up and down and slide your finger to pan the screen left or right. Chapter 3: Touch operation...
- Page 15 Zoom out Bring together your two fingers on the touch panel. Zoom in Spread apart your two fingers on the touch panel. Single Tap/Double tap Single Tap Touch the target on the screen with one fingertip for one quick tap, then release. ASUS LCD Monitor VT168N...
- Page 16 Double Tap Touch the target on the screen with one fingertip for two quick taps, then release. Tap an app to launch it (on Windows 7/8/8.1/10 only). Double-tap an item to launch it. Tap and hold To move an app, tap and hold the app tile and drag it to a new location. To close an app (on Windows 7/8/8.1/10 only), tap and hold the top side of the running app and drag it down to the bottom of the screen to close it. Chapter 3: Touch operation...
- Page 17 NOTE:• You can access to OS website to get more description on touch operation. • Do not touch the screen with sharp objects, it may result in damage, and void warranty. • Do not push hard, or rest anything on the glass surface (if in horizontal position) as it will damage the screen and void warranty. • Please keep your hands clean and dry before touching the screen to ensure fluid touch operation. • The touch function works only on OS and applications which support touch functions. ASUS LCD Monitor VT168N...
-
Page 18: Osd (On-Screen Display) Menu
OSD (On-Screen Display) menu 4.1.1 How to reconfigure ASUS VT168 Splendid Standard Mode VGA 1366x768@60Hz Scenery Mode Standard Mode Theater Mode Game Mode Night View Mode sRGB Mode Reading Mode Darkroom Mode Press the [MENU] button to activate the OSD menu. Press and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. To select the highlighted item on the menu press the button. Press and buttons to select the desired parameter. Press the button to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes. - Page 19 ASUS VT168 Splendid Standard Mode VGA 1366x768@60Hz Scenery Mode Standard Mode Theater Mode Game Mode Night View Mode sRGB Mode Reading Mode Darkroom Mode • Scenery Mode: This is the best choice for scenery photo displaying with SPLENDID™ Video Enhancement. • Standard Mode: This is the best choice for document editing with SPLENDID™ Video Enhancement. • Theater Mode: This is the best choice for movie watching with SPLENDID™ Video Enhancement. • Game Mode: This is the best choice for game playing with SPLENDID™ Video Enhancement.
- Page 20 Blue Light Filter Adjust the energy level of blue light emitted from LED backlight. ASUS VT168 Blue Light Filter Standard Mode VGA 1366x768@60Hz Level 0 Level 1 Level 2 Level 3 Level 4 • Level 0: No change. • Level 1~4: The higher the level,the more blue light will be reduced. When Blue Light Filter is activated,the default settings of Standard Mode will be automatically imported.Between Level 1 to Level 3, the Brightness function is user-configurable.Level 4 is optimized setting. It is compliance with TUV Low Blue Light Certification. The Brightness function is not user-configurable. Color Select the image color you like from this function. ASUS VT168 Color...
- Page 21 Color Temp.: Contain three preset color modes (Cool, Normal, Warm) and one User Mode. • Skin Tone: Contain three color modes including Reddish, Natural, and Yellowish. • Smart View: The versatile viewing positions with Smart View Technology. In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable; the adjusting range is from 0 ~ 100. Image You can adjust the image Sharpness, Aspect Control, VividPixel, ASCR, Position, Focus and Auto Adjust from this main function. ASUS VT168 Image Standard Mode VGA 1366x768@60Hz Sharpness Aspect Control VividPixel ASCR Position Focus Auto Adjust • Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100. (Only disable for selecting “Standard Mode” and “sRGB Mode” in Splendid menu.)
-
Page 22: Input Select
• Focus: Reduce Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100. (Only available for VGA input.) • Auto Adjust: Automatically adjust the image to its optimized position, clock, and phase. (Only available for VGA input.) 4:3 is only available when input source is in 4:3 format. Input Select Select the input source from VGA, DVI. ASUS VT168 Input Select Standard Mode VGA 1366x768@60Hz System Setup Adjust the system configuration. ASUS VT168 System Setup Standard Mode VGA 1366x768@60Hz Splendid Demo Mode GamePlus QuickFit ECO Mode... - Page 23 ASUS VT168 System Setup Standard Mode VGA 1366x768@60Hz Back Information Power Indicator Power Key Lock All Reset • Splendid Demo Mode: Activate the demo mode for the Splendid function. • GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, Crosshair function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games. To active GamePlus: • Select ON to enter the GamePlus main menu. • Press and to select between Chrosshair and Timer function. • Press to confirm the function you choose. Press to go back. Press to go off, and exit.
- Page 24 • QuickFit: Contains two patterns: (1) Grid (2) Photo size. Grid patterns:The grid patterns facilitate designers and users to organize content and layout on a page and achieve a consistent look and feel. Alignment Grid1 Alignment Grid2 Photo size:The various real photo sizes displayed in the QuickFit function provides photographers and other users to accurately view and edit their photos in real size on the screen. • ECO Mode: Activate the ecology mode for power saving. • OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen. • Language: Select OSD language. The selections are: English, French, German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croatia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai and Indonesian. • Key Lock: Disable all key functions. Pressing the second button on the right for more than five seconds to disable key lock function. • More: Return the next page of System Setup. •...
- Page 25 Shortcut Selecting this option allows you to set two shortcut keys. ASUS VT168 Shortcut Standard Mode VGA 1366x768@60Hz Shortcut Blue Light Filter Splendid Brightness Contrast Color Temp. GamePlus • Shortcut: User can select from “Blue Light Filter” “Splendid”, “Brightness”, “Contrast”, “Color Temp.”, “GamePlus” and set as shortcut key. ASUS LCD Monitor VT168N...
-
Page 26: Specifications
4.2 Specifications Model VT168N Panel Size 15.6”W(39.62 cm) Max. Resolution 1366 x 768 Brightness (Typ.) 200cd/m Intrisinc Contrast Ratio 600:1 (Typ.) Viewing Angle (CR=10) ≧90°(H) / ≧65°(V) (Typ.) Display Colors 262,144 Response Time(Typ.) 10ms DVI input D-Sub input Micro-USB port(only for touch function) Power ON Consumption Note base on EPA7.0 Power Saving Mode < 0.5 W Power OFF Mode < 0.5 W Tilt -5° ~ +30° VESA Wall Mounting Yes (75mm x 75mm) Phys. Dimension (WxHxD) 377.8 x 280.7 x 189.4mm... -
Page 27: Troubleshooting (Faq)
• Connect the computer with another available monitor to check if the computer is properly working. Screen image is too light or dark • Adjust the Contrast and Brightness settings via OSD. Screen image is not centered or • Press the auto button to automatically adjust the sized properly image. • Adjust the H-Position or V-Position settings via OSD. Screen image bounces or a wave • Make sure the signal cable is properly connected to pattern is present in the image the monitor and the computer. • Move electrical devices that may cause electrical interference. Screen image has color defects • Inspect the signal cable and make sure that none of (white does not look white) the pins are bent. • Perform Reset via OSD. • Adjust the R/G/B color settings or select the Color Temperature via OSD. Screen image is blurry or fuzzy • Press the auto button to automatically adjust the image (for VGA mode only). • Adjust the Phase and Clock settings via OSD. ASUS LCD Monitor VT168N 4-10... -
Page 28: Supported Timing List
Supported Timing List VESA / IBM Modes Support Timing (D-SUB, DVI-D inputs) Resolution Refresh Rate Horizontal Frequency 640 x 350 70Hz 31.469KHz 640 x 480 60Hz 31.469KHz 640 x 480 67Hz 35KHz 640 x 480 72Hz 37.861KHz 640 x 480 75Hz 37.5KHz 720 x 400 70Hz 31.469KHz 800 x 600 56Hz 35.156KHz 800 x 600 60Hz 37.879KHz 800 x 600 72Hz...