How To Use - babymoov Humidificateur digital Instructions For Use Manual

1. Luminescent LED
2. Air outlet
3. Water level sensor
4. Transducer
5. Valve column
6. Steam outlet
7. Cover
8. Water tank
9. Evacuation channel
10. Main housing
11. Electrical plug
A/ First use
1. Lift the cover.
2. Remove the tank from the base of the humidifier. Turn the water tank upside-down.
3. Unscrew the filler cap.
4. Fill the water tank with tap water or distilled water.
5. Screw the filler cap tightly.
6. Replace the tank on the main casing. Put the cover back in its place. Wait a few seconds for the humidifier base to fill
with water.
7. Plug the cable into the mains. Press the button
8. Point the mist jet in the desired direction. Please ensure that the mist outlet is not directed at walls, sockets, or furniture.
9. It is advisable to empty your humidifier very regularly, to prevent the development of bacteria in the tank. Turn off the
humidifier by pressing the button
10. Empty out the water from the tank and the base, following the direction of the arrows on the main casing. Finally, wipe
away any remaining drops with a soft cloth.
11. Essential oil diffuser: Essential oils are to be kept away from children. Already smallest quantities can lead to heavy
health trouble or to death, if they are swallowed. Operate from there the equipment never unsupervised. Simply pour
a few drops of essential oil into the small holder, taking care not to overfill it, and place the holder on the top of the
steam outlet tube. When the holder is empty, be sure to clean it regularly with a little soap and water. Warning: never
pour essential oil into the water tank.
B/ Initial configuration (without setting)
- The clock shows: 12.00.
- The hygrometer shows the level of humidity in the room: (XX) % of humidity.
- The thermometer shows the temperature of the room: (XX) °C.
- The default setting of the desired humidity level is 90 %.
- The icon and the water level indicator depend on the amount of water in the tank:
• if there is enough water: the icon
• if there is not enough water : the icon
- The default setting of the steam output shown on the LCD screen will be the minimum outflow level (the shortest bar).
C/ Setting the functions
Setting the steam output
Press the "+" or "-" button to set the steam output.
Five bars represent the various levels of steam output. The power of each bar will be as follows.
- 1st bar level: steam output = 110 ml/hour
- 2nd bar level: steam output = 150 ml/hour
- 3rd bar level: steam output = 180 ml/hour
- 4th bar level: steam output = 220 ml/hour
- 5th bar level: steam output = 250 ml/hour
Once the humidifier has been unplugged or turned off, the steam output will automatically return to the last setting.
Setting the digital clock
- Press the button and maintain the pressure for 3 seconds, the programme will enter the clock setting mode.

HOW TO USE

12. On/off switch
13. Setting the
(hygrometry)
14. Timer icon
15. Time display
16. Humidity sensor
17. Water level icon
18. Humidifier function icon
19. Locking icon
20. Setting the clock and programming
the timer
to turn on the humidifier.
. Unplug the appliance, remove the water tank from its base.
will not show on the LCD screen and the indicator will not flash.
will appear on the LCD screen and the indicator will flash.
DIGITAL HUMIDIFIER • Instruction Manual
21. Blue/red nightlight
humidity level 22. Humidity level display (hygrometry)
23. Setting the steam outlet and
24. Temperature display (thermometer)
25. Water level indicator
26. Steam output level display
27. Essential oil diffuser
+ / - control
9