Trimming; Cleaning - Philips Norelco 8240XL Owner's Manual

ENGLISH
14
2 Stretch your skin with your free hand so
blades can lift and cut whiskers. Gently
press razor to skin so the floating heads
can follow the contours of your face. DO
NOT press too hard. Too much pressure
can pinch the skin into the combs.
3 Turn razor OFF by pressing the on/off
button once.
The power-on symbol in the on/off button goes
OFF.
C
4 Put the Protective Razor Head Cap on the
razor to protect razor heads.
For optimal shaving results, replace Philips
Norelco razor heads (model #HQ9) once a year.

Trimming

To groom sideburns and moustache:
1 Turn razor ON.
C
2 Push down spring-release trimmer switch.
The trimmer can be activated while the razor is
running.
C
3 Hold trimmer as shown and move in
downward strokes with gentle pressure.
C
4 Close trimmer by pressing trimmer down.
5 Turn razor OFF.

Cleaning

C
◗ The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch Razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head assembly
while motor is on.
◗ Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
Cleaning: Razor Heads
The quickest and easiest way to clean the razor
heads is to rinse them after each use or at least
once a week with hot water: Water from the tap
should be on a hot setting, BUT BE CAREFUL
TO TEST WATER FIRST SO AS NOT TO BURN
OR SCALD HANDS.
ENGLISH
15