Setting Unit - LaserLiner LR44 Manual

1
1.
2.
LR44 (1,5 V)

Setting unit

3
To set the required temperature unit,
press and hold the „°C/°F" button until
the corresponding symbol appears in the
display.
Hold/Max/Min
4
Press the „Hold" button to hold the
current measured value in the display
(Hold ashes in display). To determine the
maximum or minimum temperature du-
ring a measurement, press and hold the
„Hold" button until „MAX" or „MIN"
ashes in the display. Normal measuring
mode is set when no function is ashing
in the display.
Technical data
Measuring range
Accuracy
Resolution
Measuring rate
Automatic switch-off
Power supply
Subject to technical alterations. 11.11
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment. Further safety and supplementa-
ry notices at: www.laserliner.com/info
ThermoTester
ON/OFF
2
Auto-OFF: approx.
20 min.
Hold
MAX
MIN
-40 °C ... 250 °C
1.5% ±2 °C
0,1°
2 seconds
approx. 20 minutes
LR44 (1.5 V)
05
GB