Advertisement
Available languages
Available languages
Read the operating instructions and the enclosed
!
brochure „Guarantee and additional notices"
completely. Follow the instructions they contain.
Safely keep these documents for future reference.
Function/application:
The digital thermometer features an integrated NTC sensor
which is used to measure temperature and temperature diffe-
rences. The thermometer is used to measure the temperature
of bulk, liquid or soft materials in all standard household,
gastronomy, trade, craft and industrial applications.
Safety information
• The measuring instrument must not be used in closed ovens.
• Thoroughly clean the sensor before and after use.
• The measuring instrument is not water tight. Only dip the
measuring probe into the material up to approx. 10 mm
below the casing.
• Only hold the thermometer by the casing. Do not touch the
test probe, it can become very hot during the measuring
procedure.
• „- - °C" will be displayed if the measured temperature is
outside the measuring range.
• Do not use the measuring probe with an external voltage.
Exercise extreme caution when working with voltages higher
than 24V AC/60 V DC. Touching the electrical conductors at
such voltages poses a risk of life-threatening electric shocks.
• The measuring accuracy may be affected when working close
to high voltages or high electromagnetic alternating elds.
• The device must only be used in accordance with its intended
purpose and within the scope of the speci cations.
• Measuring instruments and accessories are not toys. Keep
out of reach of children.
• Always replace the protective cover on the measuring probe
when not in use.
04
GB
Advertisement
