Jeep COMMANDER 2009 Quick Reference Manual page 10

speed conTrol leVer:
CRuise on/off
• Push the ON/OFF button to activate the Speed Control.
• CRUISE will appear on the instrument cluster to indicate the Speed
Control is on.
set
• Press down and release the lever to set a desired speed.
aCCeL/deCeL
• Press and hold the lever up to accelerate or down to decelerate the
vehicle; release the lever to save the new set speed.
• Once a speed is set, tapping the lever up or down will increase or
decrease the set speed approximately 1 mph (2 km/h).
CanCeL
• Pull the lever toward you, or apply the brakes to cancel the set speed and
maintain the set speed memory.
• Press the ON/OFF button to turn the system off and erase the set
speed memory.
ResuMe
• To resume a previously selected speed, push the lever up and release.
ve h ic l e