Table of Contents
Advertisement
◆ CEC
1) Go to CEC by pressing ▲/▼ on remote
controller or OSD
2) Press OK or SELECT button to perform CEC
control
3) Then, it activate Device Auto Power Off, TV
Auto Power On, Audio Receiver with TV
source only
◆ COM ID
1) Go to COM ID by pressing ▲/▼ on remote
controller or OSD
2) Assign command ID to connect other devices with
RS232 by pressing ◀/▶
◆ HDMI Setting
1) Go to HDMI Setting by pressing ▲/▼ on
remote controller or OSD
2) Press OK or SELECT button to set frame
frequency (Hz) of HDMI source and EDID
(HDMI ports 1/2/3/4, Front and OPS source).
3) EDID 1.4 : frame frequency 30Hz
EDID 2.0 : frame frequency 60Hz
22
Advertisement
Table of Contents
