HP StoreEver MSL2024 Quickspecs page 29

Tape libraries
Hide thumbs Also See for StoreEver MSL2024:
Table of Contents

Advertisement

QuickSpecs
Technical Specifications
Dimensions
Weight
Reliability
Average Cartridge Swap Time
(drive to slot, slot to drive)
Initialization Time
Inventory Time
Average Cartridge Swap Time
in Extended Libraries (drive to
slot, slot to drive)
Connectors
Out-of-Box (HxWxD)
Shipping (HxWxD)
Out of box
Shipping
Note: The weight of each library varies somewhat based on the type and number of LTO tape drives
contained in the configuration. The weights shown here are for MSL2024/4048/8096 configurations
with 1/2/2 drives respectively per model. Configurations with different numbers of tape drives can be
calculated by adding or subtracting the weight of a tape drive. An LTO-6 Ultrium 6250 drive weighs
2.10 kg/4.63 lbs.
MSBF (mean swaps
between failures)
MTBF (mean time between
failures)
Extended Library
Configuration
2024/4048
4048/4048
2024/8096
4048/8096
NOTE: Two MSL2024s or two MSL8096s are not supported configurations
MSL8048 must have all 96 slots enabled prior to using the Library Extender. Once all 96 slots have
been enabled for use, the supported configurations are the same as 8096s.
DA - 13258 Worldwide — Version 36 — January 18, 2013
HP StoreEver MSL2024/MSL4048/MSL8048/MSL8096
864 GB/hr (two 920)
MSL2024
3.4 x 18.9 x 31.7 in (8.7
x 48 x 80.6 cm)
(17.5 x 48 x 80.6 cm)
10.7 x 23.2 x 38.9 in
13.7 x 23.2 x 38.9 in
(27.1 x 58.9 x 98.7 cm)
(34.8 x 58.9 x 98.7 cm)
32.9 lb (14.9 kg)
56.9 lb (25.8 kg)
2 Million robot load/unload cycles
100,000 hours (based on 1M MSBF)
45 seconds
1:20 minutes
(using bar code labeled
(using bar code labeled
cartridges)
Mini-SAS (located on back of MSL SAS model only)
-LTO3 and LTO4; 3Gb/s
- LTO5 and LTO6; 6Gb/s
68-pin HDTS (located on back of MSL SCSI models only)
320Mbytes/sec
LC Optical Fibre (located on back of MSL FC models only)
-LTO3 and LTO4; 1,2 or 4Gb/s
-LTO5 and LTO6; 2,4 or 8Gb/s(1) RJ-45 (located on back of MSL Library)
(Manufacturing use only, 115Kbaud)
(1) USB port (located on back of MSL Library) , USB 2.0 interface
Tape Libraries
MSL4048
MSL8048/8096
6.9 x 18.9 x 31.7 in
13.9 X 18.9 X 31.7 in
(35.2 x 48 x 80.6 cm)
26 X 25.8 X 40.1 in
(68.5 x 65.5 x 102.5 cm)
47.2 lbs (21.4 kg)
102.7 lbs (46.6 kg)
74.7 lbs (33.9 kg)
164 lbs (74.4 kg)
45 seconds
80 to 120 seconds
2:15 minutes
(using bar code labeled
cartridges)
Average Swap Time
50 seconds
4:30 minutes
cartridges)
100 seconds
98 seconds
110 seconds
110 seconds
Page 29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storeever msl4048Storeever msl8048Storeever msl8096

Table of Contents