Replacing The Individual Tines - Yardworks 060-3864-2 Operator's Manual

16
model no. 060-3864-2 | contact us: 1.866.523.5218
the dethatcher cylinder can cause injuries! Prior to making adjustments, unplug the unit and
wait until the dethatcher cylinder has stopped. Wear heavy-duty work gloves when making
adjustments. if the dethatcher cylinder is not yet worn but individual springs have broken,
these must be replaced. only identical replacement springs may be used. Call our toll-free
helpline: 1.866.523.5218.

REPLACING THE INDIVIDUAL TINES

• Disconnect dethatcher from the power source. Allow sufficient time for moving parts to
totally stop.
• turn the dethatcher over.
• Remove the two star-shaped screws (1), the flat washer (2) and the lock washer (3)
which secure the tine casing. Remove the two nuts on the opposite side with a star-head
screwdriver.
• Press the lock (4) on the edge of the shaft with a slotted screwdriver to separate the tine
casing from the shaft.
• Replace the worn or broken tines with new ones.
YARDWORKS REPLACEMENT TINES 060-6115-8
• fasten the tine casing back together using the flat washer and the lock washer in their
original order.
!
WARNING: All the screws to mount the halves of the tine
holder must have a flat washer (2) and a lock washer
(3) on their threads to prevent screws from loosening
during usage.
4
1
2
3