Yealink SIP-T9CM User Manual
  1. Manuals
  2. Brands
  3. Yealink Manuals
  4. IP Phone
  5. SIP-T9CM
  6. User manual
Yealink SIP-T9CM User Manual

Yealink SIP-T9CM User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
1 Instruction
This user's manual is for VoIP Phone. It will explain the keypad
instruction, web configuration and command line configuration
for VoIP Phone. Before using VoIP Phone, some setup processes
are required in order to make the VoIP Phone work properly.
Please refer to the Setup Menu for further information.
Network feature
(1) Supports SIP 2.0 and 1.0 protocol
(2) Supports NAT transverse: STUN mode
(3) Supports static/dynamic WAN-IP-Addressing and PPPOE
(4) Supports in-band DTMF and out- band RFC2833 DTMF
(5) Supports proxy mode and peer-to-peer SIP link mode
High voice quality
(1) Codec: G.711 A/µ, G.723.1High/low, G.726 and G.729A/B
(2) Supports: VAD(voice activity detection), CNG( comfortable
noise generator), LEC (line echo canceller), packet loss
compensation and adaptive jitter buffer.
Easy to use
(1) 2 lines x 16 characters big LCD with blue backlight
(2) Can be configured through web browser, console/telnet or
keypad
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SIP-T9CM and is the answer not in the manual?

Questions and answers

Related Manuals for Yealink SIP-T9CM

Summary of Contents for Yealink SIP-T9CM

  • Page 1 1 Instruction This user’s manual is for VoIP Phone. It will explain the keypad instruction, web configuration and command line configuration for VoIP Phone. Before using VoIP Phone, some setup processes are required in order to make the VoIP Phone work properly. Please refer to the Setup Menu for further information.

  • Page 2: Installation

    (5) Phone function: volume adjustment, speed dial, phone book, flash and speaker phone (6) 2 RJ45 LAN port: one for internet and one for PC Package contains (1) One SIP-T9CM (2) One universal power adaptor (3) One Ethernet cable Please install your terminal as the connection chart above.

  • Page 3: Network Settings

    4.2 Use the web based programming page network uses static IP, you should set local IP, subnet mask, After getting correct IP, open an Internet Explorer browser on the gateway IP, DNS1 and DNS2 first. If your network uses PPPoE, PC which is connected with the same network as the terminal you should set PPP password first 4.4 Set time and SNTP server...

  • Page 4: Phone Functions

    4.8 Use Keypad to set this device Call forward !Note: Before you set SIP Setting, you need to get authority in the CONF 3-way conference menu Administrator->System Authority. You should input root’s ENTER This is “ENTER”, accept setting This is “Delete”, Delete word or phone password here.

  • Page 5: Call Duration Display

    5.3 Speaker Using the phone: press MENU then use up/down to select the Press SPEAKER on the phone to have a hands free call, press ‘Phone Book’ , press ENTER and use up/down to select the ‘Add SPEAKER again to hang up or pick up the handset to have normal entry’, then press ENTER to add a contact to the list.
  • Page 6 5.12 Dial Plan Replace rule Set dialing rule. Left box is for the prefix to be added. Right box is for the rule to be matched so that action will be taken by adding the prefix on the left. Dial Now When the number matches with the rule of “Dial Now”, numbers will be sent out automatically.

  • Page 7: Service Features

    Explanation: The default setting is Yes. When set to Yes, If the first three digits of the number dialed by the user ae 002, send key “#” can be used as a key to finish dialing 003, 004, 005, 007 or 009, the device will drop all these numbers and not wait for the Auto Dial Time to finish.
  • Page 8 6.1 Caller ID display 6.4 Call Transfer When there is a incoming call, the screen will show you the caller Attendant Transfer Operation: While B call A, press ‘FLASH’ button. Input the 6.2 Call Forwarding destination number and ‘#’, after someone pickup the call you can 6.2.1 Unconditional Call Forward tell her/him there is a call for him and hung up, then the call will The incoming call will always forward to the destination number.

  • Page 9: Multiple Lines

    6.9 Multiple lines Note: you may lose all the settings in the device especially You can set 3 different accounts and server information on the including account and server information. device. When the device is idle, pick 1*, 2*, 3* to select the 1 Warning: Do not let your device lose power during the upgrading and 3 line, then hang up the handset or press ‘SPEAKER’...

Table of Contents