Specifications; Safety Instructions - Makita BFL080F Instruction Manual

ENGLISH
1 Battery cartridge
2 Button
3 Red part
4 Indicator lamp
5 Capacity
6 Switch trigger
7 Reversing switch lever
8 A side
9 B side
10 Clockwise
11 Counterclockwise
12 Lamp

SPECIFICATIONS

Model
Hard joint
Fastening
torque
Soft joint
Square drive
-1
No load speed (min )
Dimensions
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screwdriving in wood, metal and
plastic.
6
Explanation of general view
13 LED indicator
14 Angle head
15 Adjusting ring
16 Ring
17 Scale
18 Compression spring
19 Adjusting grip
20 Hole for adjusting grip
21 Yellow line
22 Socket
23 Hole
24 Pin
BFL080F
2 – 8 N•m
2 – 7.5 N•m
9.5 mm
450
430 mm x 65 mm x 74 mm
(with Battery Cartridge BH9020A)
454mm x 65 mm x 74 mm
(with Battery Cartridge BH9033A)
1.5 kg (with Battery Cartridge BH9020A)
1.7 kg (with Battery Cartridge BH9033A)
D.C. 9.6 V
BFL120F BFL081F
5 – 12 N•m 2 – 8 N•m
5 – 12 N•m 2 – 7.5 N•m
9.5 mm 9.5 mm
250 700
(with Battery Cartridge BH1220C)
(with Battery Cartridge BH1233C)
1.7 kg (with Battery Cartridge BH1220)
1.6 kg (with Battery Cartridge BH1220C)
2.0 kg (with Battery Cartridge BH1233)
1.9 kg (with Battery Cartridge BH1233C)

SAFETY INSTRUCTIONS

WARNING! When using battery operated tools basic
safety precautions, including the following, should
be followed to reduce the risk of fire, leaking batter-
ies and personal injury: Read these instructions
before operating this product and save these instruc-
tions.
For safe operation:
1. Keep work area clean
– Cluttered areas and benches invite injuries.
2. Consider the work environment.
– Do not expose the tool to rain. Keep work area well
lit. Do not use tools in the presence of flammable
liquids or gases.
3. Keep children away
– Do not let visitors touch the tool. Keep visitors
away from work area.
4. Store batteries or idle tools
– When not in use, tools and batteries should be
stored separately in a dry, high or locked up place,
out of reach of children.
– Ensure that battery terminals cannot be shorted
by other metal parts such as screws, nails, etc.
25 Screw bit
26 Sleeve
27 Range of fastening capacity
28 Revolution angle (°)
29 Torque (N•m)
30 Limit mark
31 Screwdriver
32 Brush holder cap
33 Screw
34 Light cover
BFL121F
5 – 12 N•m
5 – 11.5 N•m
9.5 mm
410
430 mm x 71 mm x 92 mm
(with Battery Cartridge BH1220)
413 mm x 74 mm x 92 mm
454 mm x 71 mm x 92 mm
(with Battery Cartridge BH1233)
421 mm x 74 mm x 102 mm
D.C. 12 V
BFL200F
8 – 20 N•m
8 – 18 N•m
9.5 mm
220